Entrar

Anais do Congresso Anual da ABM

ISSN 2594-5327

65º Congresso ABM — vol. 65, num.65 (2010)

Título

ADVANCED MATERIAL CHARACTERIZATION OF FORMED METASTABLE AUSTENITIC STEELS TO ANALYSE THE PHASE TRANSFORMATION

ADVANCED MATERIAL CHARACTERIZATION OF FORMED METASTABLE AUSTENITIC STEELS TO ANALYSE THE PHASE TRANSFORMATION

Autoria

Voges-Schwieger, Kathrin; Olle, Philipp; Hübner, Sven; Behrens, Bernd-Arno

Voges-Schwieger, Kathrin
Voges-Schwieger, Kathrin

Eu sou esse autor

Olle, Philipp
Olle, Philipp

Eu sou esse autor

Hübner, Sven
Hübner, Sven

Eu sou esse autor

Behrens, Bernd-Arno
Behrens, Bernd-Arno

Eu sou esse autor

DOI

10.5151/2594-5327-16049

Downloads

Baixar Artigo 52 Downloads

Resumo

Material characterization becomes more and more important for the description of material behavior in numerical modeling. To specify the fractions of strain-hardening due to the change of microstructure from austenite into α’-martensite and work-hardening considering the forming process in metastable austenitic steels, a new approach of material characterization is necessary. Therefore, the influence of different forming temperatures is investigated. The present paper deals with various analyses of the phase transformation in deep drawn parts and their characterization in order to examine the formation process at temperatures below the room temperature. Several (residual-) austenitic steels, e.g. stainless steels and TRIP-steels are investigated. One goal of the investigations is the stress-dependent description of strain-induced martensite formation.

 

Material characterization becomes more and more important for the description of material behavior in numerical modeling. To specify the fractions of strain-hardening due to the change of microstructure from austenite into α’-martensite and work-hardening considering the forming process in metastable austenitic steels, a new approach of material characterization is necessary. Therefore, the influence of different forming temperatures is investigated. The present paper deals with various analyses of the phase transformation in deep drawn parts and their characterization in order to examine the formation process at temperatures below the room temperature. Several (residual-) austenitic steels, e.g. stainless steels and TRIP-steels are investigated. One goal of the investigations is the stress-dependent description of strain-induced martensite formation.

Palavras-chave

α’-martensite; Phase transformation; Material characterization.

α’-martensite; Phase transformation; Material characterization.

Como citar

Voges-Schwieger, Kathrin; Olle, Philipp; Hübner, Sven; Behrens, Bernd-Arno. ADVANCED MATERIAL CHARACTERIZATION OF FORMED METASTABLE AUSTENITIC STEELS TO ANALYSE THE PHASE TRANSFORMATION , p. 404-412. In: 65º Congresso ABM, Rio de Janeiro, 2010.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-16049