Anais do Congresso Anual da ABM


ISSN 2594-5327

73º Congresso Anual da ABM vol. 73, num.73 (2018)


Título

CARACTERIZAÇÃO DAS PROPRIEDADES MECÂNICAS E RESISTÊNCIA À FADIGA DE FIOS DE NiTi APÓS DIFERENTES TRATAMENTOS TÉRMICOS

MECHANICAL AND FATIGUE RESISTANCE CHARACTERIZATION OF HEAT-TREATED NiTi WIRES

DOI

10.5151/1516-392X-31631

Downloads

Baixar Artigo 282 Downloads

Resumo

As ligas NiTi apresentam propriedades de superelasticidade e/ou efeito memória de forma que possibilitam seu emprego nas indústrias médica e odontológica. É comum que seu uso se dê em situações de carregamento cíclico, que podem levar à fadiga. Um importante procedimento para aumentar a resistência à fadiga é a submissão dos fios a recozimento, proporcionando alteração em seus comportamentos mecânico e funcional. Neste trabalho foram avaliadas as variações na resistência à fadiga por flexão rotativa a 25°C de fios NiTi superelásticos, tratados termicamente a temperaturas de 300°C a 500°C durante 1 hora. Os fios passaram por caracterização física através de análises de DSC, caracterização mecânica por ensaios de tração e de recuperação de forma, além de ensaio de fadiga por flexão rotativa. Os resultados exibiram um aumento nas temperaturas de transformação dos fios devido ao recozimento, formação de fase R intermediária à transformação de austenita/martensita e a redução da tensão de patamar. Foi observado que a resposta do comportamento em fadiga dos fios para deformações acima de 7% é insensível aos tratamentos térmicos. Para deformações abaixo de 7% os tratamentos térmicos promoveram aumento da resistência à fadiga.

 

NiTi alloys have properties of superelasticity and / or shape memory effect so that it can find use in the medical and dental industries. It is common for it to be used in cyclic loading applications, which can lead to fatigue failure. An important procedure to increase the fatigue resistance is annealing, providing a change in their mechanical and functional behavior. In this work, the variations in fatigue strength were evaluated by rotary bending fatigue tests at 25 ° C of superelastic NiTi wires, heat treated at temperatures of 300 ° C to 500 ° C for 1 hour. The wires underwent physical characterization through DSC analysis, mechanical characterization by tensile and shape recovery tests, as well as fatigue tests. The results showed an increase in the wire transformation temperatures due to annealing, intermediate R phase formation to the austenite / martensite transformation and the reduction of the plateau stress. It was observed that the fatigue behavior response of the wires to strains above 7% is insensitive to the applied heat treatments. For strain amplitudes below 7% the thermal treatments increased fatigue resistance.

Palavras-chave

Ligas Ni-Ti; Fadiga; Tratamentos térmicos.

Ni-Ti alloys; Fatigue; Heat treatments.

Como citar

Almeida, Maria Luiza Andrade; Resende, Pedro Damas; Silva, Jéssica Dornelas; Pagotto, Bárbara Moreno; Santos, Caio Martins dos; Lopes, Natália Isabel de Azevedo; Buono, Vicente Tadeu Lopes. CARACTERIZAÇÃO DAS PROPRIEDADES MECÂNICAS E RESISTÊNCIA À FADIGA DE FIOS DE NiTi APÓS DIFERENTES TRATAMENTOS TÉRMICOS , p. 1321-1330. In: 73º Congresso Anual da ABM, São Paulo, 2018.
ISSN: 2594-5327 , DOI 10.5151/1516-392X-31631