ISSN 2594-5327
65º Congresso ABM — vol. 65, num.65 (2010)
Título
Autoria
DOI
Downloads
Resumo
Fe-Mn-Al alloys have been developed to replace traditional stainless steel in some applications, in less severe corrosive environments. In this work, an alloy of this class was subjected to two different boronizing treatments, aiming to verify the influence of these treatments on the hardness and sea water corrosion resistance of this alloy. The boronizing treatment was carried out using liquid and powder medium. The layer formed in liquid medium was harder but thinner. The sample boronized by salt bath process presented the biggest corrosion potential and the smallest corrosion current, followed by the pack boronized and the un-treated alloy.
Fe-Mn-Al alloys have been developed to replace traditional stainless steel in some applications, in less severe corrosive environments. In this work, an alloy of this class was subjected to two different boronizing treatments, aiming to verify the influence of these treatments on the hardness and sea water corrosion resistance of this alloy. The boronizing treatment was carried out using liquid and powder medium. The layer formed in liquid medium was harder but thinner. The sample boronized by salt bath process presented the biggest corrosion potential and the smallest corrosion current, followed by the pack boronized and the un-treated alloy.
Palavras-chave
Fe-Mn-Al; Salt bath; Pack; Boronizing; Corrosion.
Fe-Mn-Al; Salt bath; Pack; Boronizing; Corrosion.
Como citar
Casteletti, Luiz Carlos;
Heck, Stênio Cristaldo;
Picon, Carlos Alberto;
Tremiliosi-Filho, Germano;
Neto, Amadeu Lombardi.
COMPARISON OF CORROSION RESISTANCE OF A Fe-Mn-Al ALLOY BORONIZED BY PACK OR SALT BATH PROCESS
,
p. 4384-4388.
In: 65º Congresso ABM,
Rio de Janeiro,
2010.
ISSN: 2594-5327
, DOI 10.5151/2594-5327-16894
