Anais do Congresso Anual da ABM


ISSN 2594-5327

69° Congresso Anual da ABM - Internacional vol. 69, num.69 (2014)


Título

COMPORTAMENTO MECÂNICO DE INSTRUMENTOS ENDODÔNTICOS DE Ni-Ti M-WIRE E Ni-Ti CONVENCIONAL ATRAVÉS DE SIMULAÇÃO PELO MÉTODO DOS ELEMENTOS FINITOS

MECHANICAL BEHAVIOR OF M-WIRE Ni-Ti AND CONVENTIONAL Ni-Ti ENDODONTIC INSTRUMENTS VIA FINITE ELEMENT METHOD SIMULATION

DOI

10.5151/1516-392X-24697

Downloads

Baixar Artigo 314 Downloads

Resumo

O objetivo deste trabalho foi avaliar o comportamento mecânico sob flexão de um instrumento endodôntico constituído de Ni-Ti M-Wire e comparar suas respostas com aquelas obtidas de um instrumento de Ni-Ti superelástico convencional com a mesma geometria, utilizando-se simulação por elementos finitos. Um instrumento ProTaper Universal F1 foi selecionado para este estudo. O modelo geométrico para a simulação numérica foi gerado através de micro-tomografia computadorizada e os dados para os modelos constitutivos foram obtidos por meio de ensaios de tração realizados em laboratório. A simulação numérica foi realizada em ABAQUS, com condições de contorno baseadas na especificação ISO 3630-1. Os resultados mostram que instrumentos de Ni-Ti M-Wire apresentam maior flexibilidade e menores valores de tensão quando submetidos à flexão, o que indica que estes instrumentos são mais resistentes à fadiga por flexão.

 

The aim of this study was to evaluate the mechanical behavior under flexion of a Ni-Ti M-Wire endodontic instrument and compare its responses with those obtained from a conventional superelastic Ni-Ti instrument with the same geometry using finite element simulation. A ProTaper F1 instrument was selected for this study. The geometric model for the numerical simulation was generated by micro-computed tomography and the data for the constitutive model were obtained by means of tensile tests performed in laboratory. The numeric simulation was performed in ABAQUS with boundary conditions that were based on the ISO 3630-1 specification. The results show that M-Wire Ni-Ti instruments present higher flexibility and lower stress values when subjected to flexion what indicates that these instruments are more fatigue resistant.

Palavras-chave

Instrumentos endodônticos de Ni-Ti; M-Wire; Método dos elementos finitos

Ni-Ti endodontic instruments; M-Wire; Finite element method

Como citar

Leandro de Arruda Santos; Estevam Barbosa de Las Casas; Maria Guiomar de Azevedo Bahia; Vicente Tadeu Lopes Buono. COMPORTAMENTO MECÂNICO DE INSTRUMENTOS ENDODÔNTICOS DE Ni-Ti M-WIRE E Ni-Ti CONVENCIONAL ATRAVÉS DE SIMULAÇÃO PELO MÉTODO DOS ELEMENTOS FINITOS , p. 7712-7720. In: 69° Congresso Anual da ABM - Internacional, São Paulo - Brasil, 2014.
ISSN: 2594-5327 , DOI 10.5151/1516-392X-24697