ISSN 2594-5327
71th ABM Annual Congress — vol. 71, num.71 (2016)
Título
Autoria
DOI
Downloads
Resumo
O presente estudo teve por objetivo verificar a independência tanto da Curva Limite de Tensão (CLT), quanto da Curva Limite de Deformação Plástica Efetiva (CLDPE) em relação à trajetória de deformação. Para tal, foram utilizadas Curvas Limite de Conformação (CLC) de aço livre de intersticiais (Interstitial Free - IF), determinadas, primeiramente, por meio de trajetórias lineares e, posteriormente, por trajetórias bi-lineares estabelecidas por níveis de pré-deformação nos modos de tração uniaxial e estiramento biaxial simétrico. As previsões da CLT e da CLDPE, calculadas a partir das deformações limites da CLC convencional em trajetórias lineares e bi-lineares, mostraram-se independentes em relação à trajetória de deformação. Entretanto, verificou-se que o critério de escoamento adotado tem grande influência na forma e posição destas curvas limites.
The present study aimed to validate the independence of both Forming Limit Stress (FLS) and Effective Plastic-Strain Limit Curve (EPSLC) in relation to the strain-path. For this purpose, Forming Limit Curve (FLC) tests were performed on an Interstitial Free steel (IF), firstly by means of linear strain-paths and, secondly, by bi-linear strain paths under uniaxial tension and equibiaxial stretching modes. The FLS and EPSLC predictions, calculated from strain limits of the conventional FLC in linear and bi-linear paths, showed a strain-path independence. However, it was verified a strong influence yield criterion of the adopted upon the shape and position of these curves.
Palavras-chave
Curva limite de conformação, Curva limite de tensão, Curva limite de deformação plástica efetiva, Interstitial free
Forming limit curve, Forming limit stress, Effective plastic-strain limit curve, Interstitial free
Como citar
Ferreira, Jetson Lemos;
Tepedino, José Osvaldo Amaral;
Wolff, Marco Antonio;
Moreira, Luciano Pessanha.
CURVA LIMITE DE CONFORMAÇÃO INDEPENDENTE DA TRAJETÓRIA DE DEFORMAÇÃO: DESCRIÇÕES NOS ESPAÇOS DE TENSÕES E DE DEFORMAÇÕES
,
p. 1229-1238.
In: 71th ABM Annual Congress,
Rio de Janeiro,
2016.
ISSN: 2594-5327
, DOI 10.5151/1516-392X-28010