Entrar

Anais do Seminário de Laminação, Conformação de Metais e Produtos

ISSN 2594-5297

59º Seminário de Laminação, Conformação de Metais e Produtos — vol. 59, num.59 (2024)

Título

CUSTOMIZED AND COST-EFFECTIVE SOLUTIONS FOR PRODUCTION AND PRODUCT MIX INCREASE IN HDGL FURNACES REVAMPING: A TECHNICAL AND ERECTION CHALLENGE

CUSTOMIZED AND COST-EFFECTIVE SOLUTIONS FOR PRODUCTION AND PRODUCT MIX INCREASE IN HDGL FURNACES REVAMPING: A TECHNICAL AND ERECTION CHALLENGE

Autoria

CAROZZO, GIOVANNI; SANTI, FILIPPO DE

CAROZZO, GIOVANNI
CAROZZO, GIOVANNI

Eu sou esse autor

SANTI, FILIPPO DE
SANTI, FILIPPO DE

Eu sou esse autor

DOI

10.5151/2594-5297-40968

Downloads

Baixar Artigo 2 Downloads

Resumo

TECHNOLOGICAL COMPETITIVENESS AND OPEX REDUCTION COMBINED WITH THE SHORTEST POSSIBLE DOWNTIME ARE THE DRIVING FORCES FOR A REVAMPING PROJECT. IN THIS PAPER A REAL CASE OF A TURN-KEY PROJECT PERFORMED BY DANIELI CENTRO COMBUSTION ON A HDGL ANNEALING FURNACE IS PRESENTED. COOLING AND SOAKING SECTIONS OF THE FURNACE HAVE BEEN MODIFIED FROM HORIZONTAL TO VERTICAL CONFIGURATION AND MOST OF THE ERECTION HAS BEEN SAFELY PERFORMED DURING NORMAL PRODUCTION WITH THE AIM OF DOWNTOWN MINIMIZATION. THE OUTCOMES OF THE PROJECT ARE PRODUCTIVITY INCREASE, NATURAL GAS CONSUMPTION REDUCTION AND PRODUCT MIX EXTENSION, PERMITTING THE CUSTOMER TO PRODUCE AHSS GRADES THANKS TO THE INCREASED SOAKING TIME IN THE RADIANT TUBE SECTION AND THE RAPID COOLING SECTION.

 

TECHNOLOGICAL COMPETITIVENESS AND OPEX REDUCTION COMBINED WITH THE SHORTEST POSSIBLE DOWNTIME ARE THE DRIVING FORCES FOR A REVAMPING PROJECT. IN THIS PAPER A REAL CASE OF A TURN-KEY PROJECT PERFORMED BY DANIELI CENTRO COMBUSTION ON A HDGL ANNEALING FURNACE IS PRESENTED. COOLING AND SOAKING SECTIONS OF THE FURNACE HAVE BEEN MODIFIED FROM HORIZONTAL TO VERTICAL CONFIGURATION AND MOST OF THE ERECTION HAS BEEN SAFELY PERFORMED DURING NORMAL PRODUCTION WITH THE AIM OF DOWNTOWN MINIMIZATION. THE OUTCOMES OF THE PROJECT ARE PRODUCTIVITY INCREASE, NATURAL GAS CONSUMPTION REDUCTION AND PRODUCT MIX EXTENSION, PERMITTING THE CUSTOMER TO PRODUCE AHSS GRADES THANKS TO THE INCREASED SOAKING TIME IN THE RADIANT TUBE SECTION AND THE RAPID COOLING SECTION.

Palavras-chave

HDGL; annealing furnace; Cooling and soaking; furnace; AHSS grades

Product mix; AHSS; Furnace upgrading; Rapid cooling

Como citar

CAROZZO, GIOVANNI; SANTI, FILIPPO DE. CUSTOMIZED AND COST-EFFECTIVE SOLUTIONS FOR PRODUCTION AND PRODUCT MIX INCREASE IN HDGL FURNACES REVAMPING: A TECHNICAL AND ERECTION CHALLENGE , p. 282-291. In: 59º Seminário de Laminação, Conformação de Metais e Produtos, São Paulo, Brasil, 2024.
ISSN: 2594-5297 , DOI 10.5151/2594-5297-40968