ISSN 2594-357X
22° Simpósio de Mineração — vol. 22, num.22 (2023)
Título
Autoria
DOI
Downloads
Resumo
The conventional way to carry out the disposal of tailings is in dams with dilute slurries is intensively discussed today. Successive accidents in recent years have shown the shortcomings of this practice. An alternative is the use of high-density slurries. It can eliminate particle size segregation into the dam reservoir, improve life cycle, water recovery and render possible safety gains. To obtain high-density slurries they must be dewatered with thickeners, for example. This study is aimed to verify thickening optimized parameters for niobium ore flotation fine tailings. Physical, chemical and mineralogical characterization were performed, and batch thickening tests were carried out with different solids content in feed, pH, flocculant type, concentration and dosage. The results of settling rate, overflow turbidity, and solids content in underflow indicated best conditions are 5% of solids in feed, flocculant concentration of 0.05%, Magnafloc® 1011 flocculant (anionic polyacrylamide) addition of 60 g/t and pH 5.4. It was obtained 41% solids in underflow with 125 NTU of turbidity in the supernatant liquid and 52x10-3 m/s of settling rate.
The conventional way to carry out the disposal of tailings is in dams with dilute slurries is intensively discussed today. Successive accidents in recent years have shown the shortcomings of this practice. An alternative is the use of high-density slurries. It can eliminate particle size segregation into the dam reservoir, improve life cycle, water recovery and render possible safety gains. To obtain high-density slurries they must be dewatered with thickeners, for example. This study is aimed to verify thickening optimized parameters for niobium ore flotation fine tailings. Physical, chemical and mineralogical characterization were performed, and batch thickening tests were carried out with different solids content in feed, pH, flocculant type, concentration and dosage. The results of settling rate, overflow turbidity, and solids content in underflow indicated best conditions are 5% of solids in feed, flocculant concentration of 0.05%, Magnafloc® 1011 flocculant (anionic polyacrylamide) addition of 60 g/t and pH 5.4. It was obtained 41% solids in underflow with 125 NTU of turbidity in the supernatant liquid and 52x10-3 m/s of settling rate.
Palavras-chave
Tailings; Settling; Flocculant; High-density slurries.
Tailings; Settling; Flocculant; High-density slurries.
Como citar
Furtado, Renata Monteiro;
Chaves, Arthur Pinto;
Testa, Francisco Gregianin;
Paula, Priscila Tavares de;
Braga, André Soares.
DEWATERING OF NIOBIUM ORE FLOTATION TAILINGS IN BENCH SCALE
,
p. 455-466.
In: 22° Simpósio de Mineração,
São Paulo,
2023.
ISSN: 2594-357X
, DOI 10.5151/2594-357X-40034
