Anais do Congresso Anual da ABM


ISSN 2594-5327

74º Congresso Anual da ABM vol. 74, num.74 (2019)


Título

ESTUDO EXPERIMENTAL DE FLUÊNCIA EM AÇO AUSTENÍTICO AISI 310 – UMA ABORDAGEM SOBRE A FRATURA E A PROPAGAÇÃO DE TRINCA

EXPERIMENTAL CREEP STUDY OF AUSTENTISTIC STEEL AISI 310 - AN APPROACH ON THE FRACTURE AND THE CRACK GROWTH

DOI

10.5151/2594-5327-33426

Downloads

Baixar Artigo 193 Downloads

Resumo

O objetivo do presente estudo é esclarecer o comportamento da fratura em fluência de corpos de prova feitos de aço AISI 310. Para isso foram realizados ensaios de fluência em espécime com entalhe nas laterais no sentido da espessura, em 3 condições de tensões (225MPa, 160MPa e 100MPa) na temperatura de 675ºC, de modo a analisar a fratura e a deformação causada no material. A característica das superfícies de fratura mostrou-se dependente tanto da tensão quanto da temperatura, havendo uma transição de fratura dúctil, com formação de microcavidades, para fraturas intergranulares, evidenciadas por cavidades nos contornos de grão. Também foi observado o coalescimento e crescimento de microtrincas na lateral do corpo de prova em uma região à 45º a partir da ponta do entalhe, característico da propagação de dano causado pelo ensaio de fluência.

 

The aim of the present study is to clarify the creep behavior in samples made from AISI 310 steel. Creep tests were performed on notched specimens on the sides in the thickness direction, under 3 stress conditions (225MPa, 160MPa and 100MPa) at temperature of 675ºC, in order to analyze the fracture and the deformation caused in the material. The characteristic of the fracture surfaces was dependent on both stress and temperature, with a fracture transition from ductile, with dimples formation, to brittle intergranular fracture, evidenced by the cavities in the grain boundaries. It was also observed the coalescence and growth of microcracks on the side of the specimen in a region at 45º from the tip of the notch, characteristic of the propagation of damage caused by the creep test.

Palavras-chave

Fluência; AISI 310; Superfície de fratura; Propagação de trinca

Creep; AISI 310; Fracture surface; Crack growth.

Como citar

Garcia, Julianna Magalhães; Brandão, Luiz Paulo Mendonça; Costa, Ulisses Oliveira; Filho, Fabio da Costa Garcia. ESTUDO EXPERIMENTAL DE FLUÊNCIA EM AÇO AUSTENÍTICO AISI 310 – UMA ABORDAGEM SOBRE A FRATURA E A PROPAGAÇÃO DE TRINCA , p. 1348-1358. In: 74º Congresso Anual da ABM, São Paulo, 2019.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-33426