ISSN 2594-5327
70º Congresso Anual da ABM — vol. 70, num.70 (2015)
Título
Autoria
DOI
Downloads
Resumo
Ultrasonic Stirring Technology (UST) is used in this study to manufacture Al-based nano-composites. Ultrasonic cavitation plays an important role in refining the microstructure, dispersing the nanoparticles and breaking up clusters of nanoparticles. In this paper, 6061/A356 alloys and Al2O3/SiC nanoparticles are used as the matrix alloys and the reinforcements, respectively. The nanoparticles were inserted into the molten alloy and dispersed by ultrasonic cavitation and acoustic streaming. A previously developed multiphase Computational Fluid Dynamics (CFD) model was used to study the cavitation and the nanodispersion phenomena during ultrasonic processing of these alloys. A comparison between the mechanical properties of the as-cast 6061 and 356 alloys and nano-composites has been performed.
Palavras-chave
Ultrasonic stirring, 6061 and 356 alloys and nanocomposites, SiC and Al2O3 nanoparticles, Evaluation of mechanical properties
Evaluation of mechanical properties
Como citar
Jia, Shian;
Zhang, Daojie;
Nastac, Laurentiu.
EXPERIMENTAL AND MODELING ANALYSES OF Al- BASED NANOCOMPOSITES MANUFACTURED VIA MOLTEN-METAL AND SOLIDIFICATION PROCESSING ASSISTED BY ULTRASONIC STIRRING TECHNOLOGY
,
p. 607-614.
In: 70º Congresso Anual da ABM,
Rio de Janeiro,
2015.
ISSN: 2594-5327
, DOI 10.5151/1516-392X-26375
