ISSN -
2nd International Brazilian Conference on Tribology — vol. 2, num.2 (2014)
Título
DOI
Downloads
Resumo
For lubrication of open gear drives applied in rotary furnaces, often gear greases are used as well as for lubrication of gear boxes in difficult sealing conditions. The selection of the gear grease influences strongly the wear behavior. Investigations with flow greases NLGI 00 were made in a back-to-back test rig determining the weight loss due to wear acc. to the standardised procedure ISO 14635 part 3. Different influences like base oil viscosity, thickener type and additional solid lubricant type were analysed. Only the type and amount of solid lubricant shows a significant influence on the weight loss due to wear. Finally, a linear wear coefficient clT according to the calculation method of the wear amount according to Plewe is derived and can be used to transfer the test results to any gears in practice.
Palavras-chave
Gears; Lubricant; Grease; Wear
Como citar
Johann-Paul Stemplinger;
Karsten Stahl.
GREASE LUBRICATION OF GEARS
,
p. 3901-3910.
In: 2nd International Brazilian Conference on Tribology,
Foz do Iguaçu - Brasil,
2014.
ISSN: -
, DOI 10.5151/1472-5836-25571