ISSN 2594-357X
Título
Autoria
DOI
Downloads
Resumo
Advances in direct reduction (DR) technologies have resulted in increasing reduction temperatures in commercial operations. Standardized laboratory reduction testing is based on lower operating temperatures and may not adequately reflect performance under current conditions. Improvements in the test equipment and procedures at the Midrex Technology Center have been made to address this and other issues. In addition, increased analytical capabilities using updated technologies (e.g., ICP, XRF, and XRD) will be described, as well as the implications for enhanced ironmaking research.
Advances in direct reduction (DR) technologies have resulted in increasing reduction temperatures in commercial operations. Standardized laboratory reduction testing is based on lower operating temperatures and may not adequately reflect performance under current conditions. Improvements in the test equipment and procedures at the Midrex Technology Center have been made to address this and other issues. In addition, increased analytical capabilities using updated technologies (e.g., ICP, XRF, and XRD) will be described, as well as the implications for enhanced ironmaking research.
Palavras-chave
Direct reduction; Oxide coating; Testing.
Direct reduction; Oxide coating; Testing.
Como citar
Myers, Jeffrey.
IMPROVEMENTS IN LABORATORY TESTING OF DR OXIDES AT MIDREX TECHNOLOGIES, INC.
,
p. 225-230.
In: 38º Seminário de Redução de Minério de Ferro e Matérias-primas e 9º Simpósio Brasileiro de Minério de Ferro,
São Luís - MA,
2008.
ISSN: 2594-357X
, DOI 10.5151/2594-357x-0023