Anais do Congresso Anual da ABM


ISSN 2594-5327

68º Congresso da ABM vol. 68, num.68 (2013)


Título

INFLUÊNCIA DO GRAU DE ENCRUAMENTO E TRATAMENTOS TÉRMICOS DE RECOZIMENTO NAS PROPRIEDADES MECÂNICAS DO AÇO ABNT 1006

INFLUENCE OF STRAIN HARDENING AND SUBCRITICAL ANNEALING HEAT TREATMENTS ON MECHANICAL PROPERTIES OF ABNT 1006 STEEL

DOI

10.5151/2594-5327-22840

Downloads

Baixar Artigo 577 Downloads

Resumo

Baseado na norma ABNT NBR 5007, o presente trabalho consiste na análise da influência de diferentes condições de encruamento e ciclos térmicos de recozimento subcrítico nas propriedades mecânicas e tamanhos de grão do aço ABNT 1006, acalmado com alumínio e sem silício, utilizado para estampagem. O material foi laminado a frio em diferentes graus de encruamento e recozido em diferentes condições de tempo e temperatura. Para a caracterização da matéria-prima, realizou-se análise de composição química e propriedades mecânicas iniciais. Ao retirar amostras na direção longitudinal de cada redução, antes e após recozimento, realizam-se ensaios de tração, dureza, embutimento Erichsen e análise metalográfica. Após levantamento das propriedades mecânicas e tamanhos de grão do material em todas as condições de encruamento, e todos os ciclos de recozimento, foi possível obter curvas comparativas que auxiliam na interpretação do grau de encruamento e ciclo térmico necessários para se obter as propriedades mecânicas desejadas ao produto final, partindo-se de uma espessura inicial conhecida

 

Based on ABNT NBR 5007 standard, the present work evaluates the influence of different conditions of work hardening and subcritical annealing thermal cycles on the mechanical properties and grain sizes of ABNT 1006 steel, with aluminum and without silicon, used for sheet metal forming. The material is cold rolled to different degrees of strain hardening and annealed under varying conditions of time and temperature. For the characterization of the raw material, chemical composition and mechanical properties were obtained. By taking samples in the longitudinal direction of each reduction, before and after annealing, tensile mechanical properties, hardness, Erichsen draw ability and grain size were determined. It was possible to obtain comparative curves which help in the interpretation of the degree of strainhardening and thermal cycle needed to obtain the mechanical properties desired in end product, starting from a known initial thickness

Palavras-chave

Aço ABNT 1006; Estampagem; Encruamento; Recozimento subcrítico.

ABNT 1006 steel; Stamping; Hardening; Subcritical annealing.

Como citar

Corassini, Eduardo; Magnabosco, Rodrigo. INFLUÊNCIA DO GRAU DE ENCRUAMENTO E TRATAMENTOS TÉRMICOS DE RECOZIMENTO NAS PROPRIEDADES MECÂNICAS DO AÇO ABNT 1006 , p. 1-10. In: 68º Congresso da ABM, São Paulo, 2013.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-22840