Anais do Congresso Anual da ABM


ISSN 2594-5327

68º Congresso da ABM vol. 68, num.68 (2013)


Título

IZOD TOUGHNESS CHARACTERIZATION OF EPOXY COMPOSITES REINFORCED WITH CONTINUOUS AND ALIGNED JUTE FIBERS

IZOD TOUGHNESS CHARACTERIZATION OF EPOXY COMPOSITES REINFORCED WITH CONTINUOUS AND ALIGNED JUTE FIBERS

DOI

10.5151/2594-5327-22914

Downloads

Baixar Artigo 139 Downloads

Resumo

A wide variety of natural lignocellulosic fibers are increasingly being considered as viable alternatives to replace glass fiber in polymer composites. Jute fibers reinforced polymer composites are among the most investigated and applied natural composites. In this past decade the mechanical properties of these composites has been assessed for various types of test conditions. Owing to its low cost and weight, it may be used in many applications, including engineering composites. In fact, epoxy composites reinforced with natural lignocellulosic fibers have attracted interest in several areas, especially engineering due to its low cost, besides being lighter. The present work investigates the toughness of epoxy composites reinforced with up to 30 wt% of continuous and aligned jute fibers. Standard Izod notched specimens were impact tested and the results showed an increase in toughness with the amount of jute fibers. Observation of the composite fracture by SEM revealed that the jute fibers act as an effective obstacle to crack propagation

 

A wide variety of natural lignocellulosic fibers are increasingly being considered as viable alternatives to replace glass fiber in polymer composites. Jute fibers reinforced polymer composites are among the most investigated and applied natural composites. In this past decade the mechanical properties of these composites has been assessed for various types of test conditions. Owing to its low cost and weight, it may be used in many applications, including engineering composites. In fact, epoxy composites reinforced with natural lignocellulosic fibers have attracted interest in several areas, especially engineering due to its low cost, besides being lighter. The present work investigates the toughness of epoxy composites reinforced with up to 30 wt% of continuous and aligned jute fibers. Standard Izod notched specimens were impact tested and the results showed an increase in toughness with the amount of jute fibers. Observation of the composite fracture by SEM revealed that the jute fibers act as an effective obstacle to crack propagation

Palavras-chave

Jute fibers; Epoxy composites; Izod test; Fracture analysis.

Jute fibers; Epoxy composites; Izod test; Fracture analysis.

Como citar

Silva, Isabela Leão Amaral da; Bevitori, Alice Barreto; Oliveira,; de, Caroline Gomes; Margem, Frederico Muylaert; Monteiro, Sergio Neves. IZOD TOUGHNESS CHARACTERIZATION OF EPOXY COMPOSITES REINFORCED WITH CONTINUOUS AND ALIGNED JUTE FIBERS , p. 485-491. In: 68º Congresso da ABM, São Paulo, 2013.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-22914