ISSN 2594-5327
69° Congresso Anual da ABM - Internacional — vol. 69, num.69 (2014)
Título
Autoria
DOI
Downloads
Resumo
Dewatering stage is among the most important industrial unit operations, and is wide adopted in many different industries, due the fact that a large portion of industrial products is produced using suspensions of solids in liquids. Nowadays the mineral processing tailings disposal is a big problem due the environmental degradation produced. The phosphate rock processing in Anglo American Phosphate Brazil, situated in Catalão/Go/Brazil, generates around 180 t/h of tailings for a plant feed of 480 t/h (approximately 37,5% of the processing plant feed), with 5 to 10% of solids and approximately 14% of P2O5. Nowadays the tailings are sent direct to the tailings dam. The present work proposes the paste production using with the tailings from phosphate rock processing plant divide in two different stages. The first one composed by the free settling of the material in presence of industrial flocculants in a graduated cylinder with 2.0 L of internal volume for one hour, in the same way it must occur in conventional thickeners. After that time, the clarified liquid was drained and the remaining pulp was sent to the second stage consisting in the tailings vacuum filtration. Ten different flocculants and nine different filter media were tested. The found results were satisfactory for paste tailings production with solids percentage around 65%.
Dewatering stage is among the most important industrial unit operations, and is wide adopted in many different industries, due the fact that a large portion of industrial products is produced using suspensions of solids in liquids. Nowadays the mineral processing tailings disposal is a big problem due the environmental degradation produced. The phosphate rock processing in Anglo American Phosphate Brazil, situated in Catalão/Go/Brazil, generates around 180 t/h of tailings for a plant feed of 480 t/h (approximately 37,5% of the processing plant feed), with 5 to 10% of solids and approximately 14% of P2O5. Nowadays the tailings are sent direct to the tailings dam. The present work proposes the paste production using with the tailings from phosphate rock processing plant divide in two different stages. The first one composed by the free settling of the material in presence of industrial flocculants in a graduated cylinder with 2.0 L of internal volume for one hour, in the same way it must occur in conventional thickeners. After that time, the clarified liquid was drained and the remaining pulp was sent to the second stage consisting in the tailings vacuum filtration. Ten different flocculants and nine different filter media were tested. The found results were satisfactory for paste tailings production with solids percentage around 65%.
Palavras-chave
Mineral paste; Phosphate rock; Dewatering; Tailings
Mineral paste; Phosphate rock; Dewatering; Tailings
Como citar
André Carlos Silva;
Elenice Maria Schons Silva;
Juarez Gonçalves Mesquita;
Ângelo Pereira da Silva Junior;
João Paulo Aparecido Arruda;
Vítor Rodrigues de Araujo Vaz.
PASTE PRODUCTION FROM PHOSPHATE ROCK TAILINGS TROUGH FREE SETTLING AND VACUUM FILTRATION
,
p. 8846-8858.
In: 69° Congresso Anual da ABM - Internacional,
São Paulo - Brasil,
2014.
ISSN: 2594-5327
, DOI 10.5151/1516-392X-25070
