ISSN 2594-5327
70º Congresso Anual da ABM — vol. 70, num.70 (2015)
Título
Autoria
DOI
Downloads
Resumo
A produção de diamante sintético pode ser influenciada por vários fatores, podendo citar o dispositivo para o tratamento á célula reativa sob Altas Pressões e Altas Temperaturas – APAT, elementos que podem ser adicionados ao sistema. No presente trabalho foi utilizado Ni-Mn-C com adição da porcentagens de 4% de Ferro, os parâmetros utilizados no processo de síntese foram 4,5GPa de pressão e 1250oC de temperatura, sendo estes parâmetros mantidos por 10 minutos no dispositivo do tipo concavidade central. O efeito de 4% de ferro adicionado a célula reativa pode ser observado a partir de análises de raio-x e microscopia eletrônica de varredura. A influência do ferro foi observada no mecanismo de nucleação e crescimento dos cristais e no rendimento do processo.
The synthetic diamond production can be influenced by many factors and can quote the device for the treatment will reactive cell under High Pressures and High Temperatures - HPHT, elements that can be added to the system. In the present study we used Ni-Mn-C with the addition of percentages of 4% iron, the parameters used in the synthesis process were 4,5GPa pressure and temperature of 1250° C was accomplished and maintained for 10 minutes in the type hollow device central. The effect of 4% of iron added to the reactive cell can be observed from scanning electron microscopy, x-ray analysis. The influence of iron has been observed in the mechanism of nucleation and growth of crystals and the yield of the process.
Palavras-chave
Síntese, Diamante, Ferro
Synthesis, Diamond, Iron
Como citar
Rodriguesr, Quésia de Freitas Silva Fonseca;
Skury, Ana Lúcia Diegues;
Monteiro, Sérgio Neves;
Bobrovnitchii, Guerold S..
SÍNTESE DE DIAMANTES UTILIZANDO O SISTEMA Ni–Mn-C COM ADIÇÃO DE 4% DE FERRO
,
p. 2369-2374.
In: 70º Congresso Anual da ABM,
Rio de Janeiro,
2015.
ISSN: 2594-5327
, DOI 10.5151/1516-392X-27124