Anais do Congresso Anual da ABM


ISSN 2594-5327

70º Congresso Anual da ABM vol. 70, num.70 (2015)


Título

SÍNTESE DE NANOFIOS DE PRATA: APLICAÇÕES EM TINTAS CONDUTORAS

SILVER NANOWIRES SYNTHESIS FOR THE MANUFACTURE OF CONDUCTIVE INKS

DOI

10.5151/1516-392X-26939

Downloads

Baixar Artigo 1074 Downloads

Resumo

Neste trabalho, foram sintetizados e caracterizados nanofios de prata que posteriormente foram usados para produção de uma tinta condutora cuja, caracterização elétrica foi medida através de valores de tensão versus corrente. A primeira fase do trabalho consiste na obtenção dos nanofios pelo método poliol. Nesta fase, fez-se uma análise da estrutura dos fios, com o objetivo de verificar a uniformidade (forma e tamanho). Para estudos da estrutura utilizou-se a microscopia ótica (MO) e microscopia eletrônica de varredura (MEV). Também utilizou-se a espectroscopia de Ultravioleta-Visível (Uv-Vis) para identificação dos nanofios no produto obtido. A segunda fase, consiste no desenvolvimento da tinta condutora, onde nanofios foram redispersados em uma mistura de solventes e CTAB em banho de ultrassom, para obtenção de valores de tensão superficial e viscosidade. Por fim, medidas de corrente contínua da tinta, permitiram a construção da curva tensão versus corrente, da qual se obteve o valor da resistência elétrica. Através da curva foi possível comprovar o caráter condutor da tinta e pela linearidade da curva, verificou-se que a tinta produzida é considerada um material ôhmico.

 

In this work, we were synthesized and characterized silver nanowires were subsequently used for producing a conductive ink which, electrical characterization was measured by voltage versus current values. The first stage of the work is to obtain the nanowires by polyol method. At this stage, an analysis was made of the yarn structure with the aim of verifying the consistency (size and shape). For studies of the structure used the optical microscopy (OM) and scanning electron microscopy (SEM). It also used the ultraviolet-visible spectroscopy (UV-Vis) for identification of the nanowires in the product. The second stage consists in the development of conductive ink, which nanowires were again dispersed in a mixture of solvents and CTAB in an ultrasound bath, to obtain surface tension and viscosity values. Finally, continuous current measurements ink, allowed the construction of the voltage versus current curve, from which was obtained the value of the electrical resistance. Through the curve was possible to prove the driver nature of the ink and linearity of the curve, it was found that the ink produced is considered an ohmic material.

Palavras-chave

Nanofios de prata, Tinta condutora, Resistência elétrica, Lei de ohms

Silver nanowires, Conductive ink, Electrical resistance, Ohms Law

Como citar

Viana, Carlos Martins; Santos, Tatiane Gomes dos; Leão, Nina Souza; Ladeira, Luiz Orlando. SÍNTESE DE NANOFIOS DE PRATA: APLICAÇÕES EM TINTAS CONDUTORAS , p. 1826-1830. In: 70º Congresso Anual da ABM, Rio de Janeiro, 2015.
ISSN: 2594-5327 , DOI 10.5151/1516-392X-26939