ISSN 2594-357X
Título
Autoria
DOI
Downloads
Resumo
The behavior of the ferrous burden in the cohesive zone of blast furnaces can be studied through the softening and melting test apparatus available in Ferrous Technology Center (CTF) at Vale S.A. This equipment can reproduce the thermodynamics conditions, gas composition and temperature, that the ferrous burden is subjected within the blast furnace, obtaining information about high temperature properties like pressure loss in cohesive zone, temperatures of the starting and end of melting, and so on. The knowledge of these parameters is essential to improve and guide the development of high performance ferrous burden for blast furnaces. This work has the main purpose to evaluate the impacts of variations of the amounts of MgO, Al2O3, CaO and SiO2 on the high temperature properties of iron ore sinters as well as the effect of using different proportions of iron ore pellets as a constituent of the ferrous burden. To do this, sinters were produced on a pilot scale plant in different chemical compositions and subsequently tested in mixed burdens with Vale’s industrial pellets.
The behavior of the ferrous burden in the cohesive zone of blast furnaces can be studied through the softening and melting test apparatus available in Ferrous Technology Center (CTF) at Vale S.A. This equipment can reproduce the thermodynamics conditions, gas composition and temperature, that the ferrous burden is subjected within the blast furnace, obtaining information about high temperature properties like pressure loss in cohesive zone, temperatures of the starting and end of melting, and so on. The knowledge of these parameters is essential to improve and guide the development of high performance ferrous burden for blast furnaces. This work has the main purpose to evaluate the impacts of variations of the amounts of MgO, Al2O3, CaO and SiO2 on the high temperature properties of iron ore sinters as well as the effect of using different proportions of iron ore pellets as a constituent of the ferrous burden. To do this, sinters were produced on a pilot scale plant in different chemical compositions and subsequently tested in mixed burdens with Vale’s industrial pellets.
Palavras-chave
Softening and melting; Pellet; Sinter; Blast furnace.
Softening and melting; Pellet; Sinter; Blast furnace.
Como citar
Parreira, Ângelo Guimarães;
Alencar, Jean Philippe Santos Gherardi de;
Botelho, Marcus Eduardo Emrich;
Oliveira, Vinicius de Morais;
Pimenta., Hamilton Porto.
STUDY OF HIGH TEMPERATURE PROPERTIES OF
FERROUS BURDEN FORMED BY PELLET AND SINTER
,
p. 2153-2161.
In: 42º Seminário de Redução de Minério de Ferro e Matérias-primas / 13º Seminário Brasileiro de Minério de Ferro / 6th International Congress on the Science and Technology of Ironmaking,
Rio de Jabeiro,
2012.
ISSN: 2594-357X
, DOI 10.5151/2594-357X-22405
