Título

STUDY OF Zn-Fe AND Zn-Fe-Co ALLOYS COATINGS OBTAINED BY ELECTRODEPOSITION FROM ACID BATHS CONTAINING CITRATE IONS

STUDY OF Zn-Fe AND Zn-Fe-Co ALLOYS COATINGS OBTAINED BY ELECTRODEPOSITION FROM ACID BATHS CONTAINING CITRATE IONS

Autoria

Nakazato, Roberto Zenhei; Ferreira, Flávia Cristina Zenith; Dutra, Conceição Aparecida Matsumoto; Codaro, Eduardo Norberto

DOI

10.5151/2594-5327-21430

Downloads

Baixar Artigo 296 Downloads

Resumo

Zinc alloy coatings have attracted great interest in industry due to the characteristics of ductility, weldability, adhesion to paint and corrosion resistance in comparison with pure zinc. In this work, Zn-Fe alloy and Zn-Co-Fe were obtained on copper from acid baths containing citrate. The electrochemical experiments were performed on 0.5 mol/L Na2SO4 + 0.05 mol/L EDTA solution. Results of anodic dissolution voltammetry and galvanostatic dissolution showed that the decrease in [Zn+2] in the bath results in electrodeposited Zn-Fe with higher Fe content (1.2 - 60%) when the ratio [Zn2+]:[Fe2+] change from 1:1 to 1:4. Analysis of scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction showed refinement of the structure up to loss of crystallinity in alloys with high Fe content and the presence of ZnFe -phase in alloys with low Fe content. Addition of 0.05 mol/L Co2+ bath for different [Zn+2] and [Fe+2] favored the incorporation of Fe in the Zn-Fe- Co alloy. It was also observed that increasing the current density of -5 to -30 mA/cm2 contributed to the increasing content of Fe in the alloy.

 

Zinc alloy coatings have attracted great interest in industry due to the characteristics of ductility, weldability, adhesion to paint and corrosion resistance in comparison with pure zinc. In this work, Zn-Fe alloy and Zn-Co-Fe were obtained on copper from acid baths containing citrate. The electrochemical experiments were performed on 0.5 mol/L Na2SO4 + 0.05 mol/L EDTA solution. Results of anodic dissolution voltammetry and galvanostatic dissolution showed that the decrease in [Zn+2] in the bath results in electrodeposited Zn-Fe with higher Fe content (1.2 - 60%) when the ratio [Zn2+]:[Fe2+] change from 1:1 to 1:4. Analysis of scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction showed refinement of the structure up to loss of crystallinity in alloys with high Fe content and the presence of ZnFe -phase in alloys with low Fe content. Addition of 0.05 mol/L Co2+ bath for different [Zn+2] and [Fe+2] favored the incorporation of Fe in the Zn-Fe- Co alloy. It was also observed that increasing the current density of -5 to -30 mA/cm2 contributed to the increasing content of Fe in the alloy.

Palavras-chave

Zinc alloys; Electrodeposition; Zn-Fe alloy; Zn-Fe-Co alloy.

Zinc alloys; Electrodeposition; Zn-Fe alloy; Zn-Fe-Co alloy.