Entrar

Anais do Seminário de Aciaria, Fundição e Metalurgia de Não-ferrosos

ISSN 2594-5300

45º Seminário de Aciaria - Internacional — vol. 45, num.45 (2014)

Título

ULTRA-LOW PHOSPHORUS STEEL GRADE PRODUCTION IN ONE BATCH BOF BOTTOM BLOWING PROCESS

ULTRA-LOW PHOSPHORUS STEEL GRADE PRODUCTION IN ONE BATCH BOF BOTTOM BLOWING PROCESS

Autoria

Henrique Silva Furtado; Tathagata Bhattacharya; Hoyong Hwang; Odair Jose Kirmse

Henrique Silva Furtado
Henrique Silva Furtado

Eu sou esse autor

Tathagata Bhattacharya
Tathagata Bhattacharya

Eu sou esse autor

Hoyong Hwang
Hoyong Hwang

Eu sou esse autor

Odair Jose Kirmse
Odair Jose Kirmse

Eu sou esse autor

DOI

10.5151/1982-9345-24297

Downloads

Baixar Artigo 513 Downloads

Resumo

Concerning production of low phosphorus steel critical grades at ArcelorMittal Tubarão site, bottom blowing system plays a very important role. For those systems with independently controlled tuyeres, some non-uniform bottom blowing patterns seem to be promising in improving metal-slag mixing; however, based on computational fluid dynamics (CFD) results of ArcelorMittal Tubarão’s post oxygen bottom blowing, this may not be generalized. Also, from industrial trials it became clear that higher the bottom blowing flow rate, the closer were the end point P to the equilibrium. Despite this result an analysis of the apparent mass transfer coefficient has shown a week correlation with the classical power stir correlation suggesting a more complex kinetic limiting step for phosphorus removal.

 

Concerning production of low phosphorus steel critical grades at ArcelorMittal Tubarão site, bottom blowing system plays a very important role. For those systems with independently controlled tuyeres, some non-uniform bottom blowing patterns seem to be promising in improving metal-slag mixing; however, based on computational fluid dynamics (CFD) results of ArcelorMittal Tubarão’s post oxygen bottom blowing, this may not be generalized. Also, from industrial trials it became clear that higher the bottom blowing flow rate, the closer were the end point P to the equilibrium. Despite this result an analysis of the apparent mass transfer coefficient has shown a week correlation with the classical power stir correlation suggesting a more complex kinetic limiting step for phosphorus removal.

Palavras-chave

Dephosphorization; BOF process; Bottom blowing; CFD; Mixing

Dephosphorization; BOF process; Bottom blowing; CFD; Mixing

Como citar

Henrique Silva Furtado; Tathagata Bhattacharya; Hoyong Hwang; Odair Jose Kirmse. ULTRA-LOW PHOSPHORUS STEEL GRADE PRODUCTION IN ONE BATCH BOF BOTTOM BLOWING PROCESS , p. 2298-2308. In: 45º Seminário de Aciaria - Internacional, Porto Alegre - Brasil, 2014.
ISSN: 2594-5300 , DOI 10.5151/1982-9345-24297