Título

UMERICAL SIMULATION OF SLIDING WEAR FOR SPHERICAL PLAIN BEARINGS WITH SELF-LUBRICATING FABRIC LINER

UMERICAL SIMULATION OF SLIDING WEAR FOR SPHERICAL PLAIN BEARINGS WITH SELF-LUBRICATING FABRIC LINER

Autoria

SHEN, Xuejin; QIU, Yueping; CAO, Lei; CHEN, Xiaoyang

SHEN, Xuejin

Eu sou esse autor

QIU, Yueping

Eu sou esse autor

CAO, Lei

Eu sou esse autor

CHEN, Xiaoyang

Eu sou esse autor

DOI

10.5151/5463-5463-17217

Downloads

Resumo

Based on the thermo-mechanical finite element analysis method, a thermal wear simulation program was designed for the wear properties analysis of spherical plain bearing with self-lubricating fabric liner. In the program, the classical Archard wear model was applied to analyze the dynamical wear process of the bearing, and ABAQUS scripting interface was used to simulate the progressive accumulation of wear between contact surfaces. The position of maximum wear depth occurs at the central contact region, this is close agreement with the test results. And the relative error of the maximum wear depth between the FEA prediction and experimental results is little than 10%. It is shown that the complex nonlinear wear process can be simulated with a series of discrete quasi static models and the wear simulation program could be used to analyze the practical mechanical and tribological properties of the spherical plain bearings.

Based on the thermo-mechanical finite element analysis method, a thermal wear simulation program was designed for the wear properties analysis of spherical plain bearing with self-lubricating fabric liner. In the program, the classical Archard wear model was applied to analyze the dynamical wear process of the bearing, and ABAQUS scripting interface was used to simulate the progressive accumulation of wear between contact surfaces. The position of maximum wear depth occurs at the central contact region, this is close agreement with the test results. And the relative error of the maximum wear depth between the FEA prediction and experimental results is little than 10%. It is shown that the complex nonlinear wear process can be simulated with a series of discrete quasi static models and the wear simulation program could be used to analyze the practical mechanical and tribological properties of the spherical plain bearings.

Palavras-chave

Spherical plain bearing; Finite element method (FEM); Wear Simulation; Thermal analysis

Spherical plain bearing; Finite element method (FEM); Wear Simulation; Thermal analysis