ISSN 2594-5300
17º Seminário de Aciaria — Vol. 01 , num. 17 (1985)
Título
Autoria
DOI
Downloads
Resumo
The basic function of an ingot mould assembly consisting of mould/base plate/feeder head is to produce good quality ingots of predetermined weight and geometric shape for subsequent processing by rolling or forging. For each ingot application, it is important that ingot shape, feeder head shape and materials used should be carefully specified to produce the maximum product yield without loss of product quality. The shapes of ingot mould and base plate need to be specified with equal care as they directly affect the quality and economics of the ingot end product, this design requiring definition according to the chosen mould material and foundry operational procedures. Such a total design concept will provide the best technical and economic results in ingot casting.
The basic function of an ingot mould assembly consisting of mould/base plate/feeder head is to produce good quality ingots of predetermined weight and geometric shape for subsequent processing by rolling or forging. For each ingot application, it is important that ingot shape, feeder head shape and materials used should be carefully specified to produce the maximum product yield without loss of product quality. The shapes of ingot mould and base plate need to be specified with equal care as they directly affect the quality and economics of the ingot end product, this design requiring definition according to the chosen mould material and foundry operational procedures. Such a total design concept will provide the best technical and economic results in ingot casting.
Palavras-chave
ingot casting, ingot mould, feeder head, product yield, mould design
ingot casting, ingot mould, feeder head, product yield, mould design
Como citar
HARVEY, DR. ROBERT LEES; BANKS, MR. ALLAN PEARSON.
DESIGN OF INGOTS AND INGOT MOULDS,
p. 49-66.
In: 17º Seminário de Aciaria,
None,
1985.
ISSN: 2594-5300, DOI 10.5151/2594-5300-17Aciaria-49-66
