ISSN 2594-5300
54º Seminário de Aciaria, Fundição e Metalurgia de Não-Ferrosos — Vol. 54, Num. 54 (2025)
Título
Autoria
DOI
Downloads
Resumo
EOF is a 100% national reactor equipped with a scrap preheater and 4 oxygen injection points. This article investigates two parameters of these oxygen injectors through a physical model on a 1/6 scale of the industrial reactor. It also brings the novelty of measuring the mixing time using two techniques simultaneously: conductivity meter and lux meter. The results show that higher flow rates and shorter bath launch distances lead to shorter mixing times. It also presents a distinction between the readings by the two techniques depending on the reading method versus test conditions. Finally, it allows evaluating the best configuration that minimizes the passage of material through the slag port.
EOF IS A 100% NATIONAL REACTOR EQUIPPED WITH A SCRAP PREHEATER AND 4 OXYGEN INJECTION POINTS. THIS ARTICLE INVESTIGATES TWO PARAMETERS OF THESE OXYGEN INJECTORS THROUGH A PHYSICAL MODEL ON A 1/6 SCALE OF THE INDUSTRIAL REACTOR. IT ALSO BRINGS THE NOVELTY OF MEASURING THE MIXING TIME USING TWO TECHNIQUES SIMULTANEOUSLY: CONDUCTIVITY METER AND LUX METER. THE RESULTS SHOW THAT HIGHER FLOW RATES AND SHORTER BATH LAUNCH DISTANCES LEAD TO SHORTER MIXING TIMES. IT ALSO PRESENTS A DISTINCTION BETWEEN THE READINGS BY THE TWO TECHNIQUES DEPENDING ON THE READING METHOD VERSUS TEST CONDITIONS. FINALLY, IT ALLOWS EVALUATING THE BEST CONFIGURATION THAT MINIMIZES THE PASSAGE OF MATERIAL THROUGH THE SLAG PORT.
Palavras-chave
Mixing Time, EOF, injector, yield, conductivimetry, lucimetry
Mixing Time, EOF, injector, yield, conductivimetry, lucimetry
Como citar
Cardoso, Rafaela; Junior, Carlos Silame; Lemos, Leandro Rocha; Maia, Breno Totti; Nogueira, Caio Diniz; Araujo, Ely.
EOF INJECTORS CONFIGURATION TO REDUCE MIXING TIME MEASURE VIA CONDUCTIVIMETRY AND LUCIMETRY,
p. 282-292.
In: 54º Seminário de Aciaria, Fundição e Metalurgia de Não-Ferrosos,
São Paulo, Brasil,
2025.
ISSN: 2594-5300, DOI 10.5151/2594-5300-42080