Powered by Blucher Proceedings

Anais do Congresso Anual da ABM


ISSN 2594-5327

63º Congresso Anual da ABM Vol. 63, Num. 63 (2008)


Título

INFLUÊNCIA DO ÁCIDO ACÉTICO NA FORMAÇÃO DE MULITA POR SOL-GEL

ACETIC ACID INFLUENCE IN THE MULLITE FORMATION BY SOL-GEL

Autoria

DOI

10.5151/2594-5327-2005-16041-0102

Downloads

121 Downloads

Resumo

O uso de materiais cerâmicos em barreiras térmicas tem crescido nos últimos anos, devido a suas propriedades como estabilidade a corrosão e resistência à fratura. Este trabalho descreve a obtenção de mulita (3Al2O3.2SiO2) por sol-gel, a partir de TEOS e de Al(NO3)3.9H2O, com adição de ácido acético para verificar a sua influência no material final. Foram preparadas quatro soluções, alterando-se a ordem de adição dos reagentes. Estas soluções foram mantidas a 60 °C, sendo observado visualmente que o tempo de formação e secagem do gel foi menor quando na presença de ácido acético. Análise por DRX indicou a presença de mulita a 1200 oC em todos os casos, e pelo MEV diferenças no tamanho das partículas foram verificadas. Verifica-se então que a utilização do acido acético na síntese da mulita por sol-gel agiliza o processo sem modificar a estrutura pretendida e que a ordem de adição dos reagentes afeta o resultado final, resultando em diferentes graus de cristalização.

 

Ceramic materials have been used in thermal barrier coatings due to properties like corrosion and creep resistances. This work describes the obtention of mullite (3Al2O3.2SiO2) by sol-gel process, using TEOS and Al(NO3)3.9H2O as precursors and the addition of acetic acid to verify its influence in the final material. Four samples were prepared, differing on the order of mixture of the reagents. These samples were kept at 60 °C, and it was observed that the gelation time and the drying period were lower in the presence of acetic acid. XRD analyses indicated the presence of mullite phase at 1200 °C, in all cases. SEM showed differences in particles sizes. Therefore, acetic acid catalyzed mullite synthesis by the sol-gel process, and the order of addition of the reagents affected the final material, resulting in different degrees of crystallization.

Palavras-chave

Mulita; Sol-gel; Ácido acético; TBCs.

Mullite; Sol-gel; Acetic acid; TBCs.

Como citar

Pascoli, Adriana Silva; Kawachi, Elizabete Yoshie; Cividanes, Luciana De Simone; Garcia, Renata Batista Rivero; Thin, Gilmar Patrocínio. INFLUÊNCIA DO ÁCIDO ACÉTICO NA FORMAÇÃO DE MULITA POR SOL-GEL, p. 930-938. In: 63º Congresso Anual da ABM, Santos - SP, 2008.
ISSN: 2594-5327, DOI 10.5151/2594-5327-2005-16041-0102