Powered by Blucher Proceedings

Congresso Anual da ABM


ISSN 2594-5327

65º Congresso ABM Vol. 65 , num. 65 (2010)


Título

MECHANICAL PROPERTIES OF TENSILE TESTED COIR FIBER REINFORCED POLYESTER COMPOSITES

MECHANICAL PROPERTIES OF TENSILE TESTED COIR FIBER REINFORCED POLYESTER COMPOSITES

Autoria

DOI

10.5151/2594-5327-32365

Downloads

129 Downloads

Resumo

The fiber extracted from the husk of a coconut fruit, known as coir fiber, has been extensively investigated as a second phase incorporation into polymer composites. The moderate strength of the coir fiber usually does not represent reinforcement to relatively strong thermoset matrices such as polyester, epoxy and phenolic. However, a selection of thinner coir fibers and a post cure treatment of the composite could improve its mechanical performance. Therefore, this work investigated the tensile properties of post-cured polyester matrix composites incorporated with the thinnest coir fiber. Tensile specimens with up to 40% in volume of long and aligned coir fibers were tested and their fracture analyzed by scanning electron microscopy. A relatively improvement was found in the tensile properties for the amount of 40% of coir fiber. These results were compared with similar composites that were bend-tested. The fracture analysis showed a comparatively better fiber/matrix adhesion.

 

The fiber extracted from the husk of a coconut fruit, known as coir fiber, has been extensively investigated as a second phase incorporation into polymer composites. The moderate strength of the coir fiber usually does not represent reinforcement to relatively strong thermoset matrices such as polyester, epoxy and phenolic. However, a selection of thinner coir fibers and a post cure treatment of the composite could improve its mechanical performance. Therefore, this work investigated the tensile properties of post-cured polyester matrix composites incorporated with the thinnest coir fiber. Tensile specimens with up to 40% in volume of long and aligned coir fibers were tested and their fracture analyzed by scanning electron microscopy. A relatively improvement was found in the tensile properties for the amount of 40% of coir fiber. These results were compared with similar composites that were bend-tested. The fracture analysis showed a comparatively better fiber/matrix adhesion.

Palavras-chave

coir fibers, Polyester composites, Tensile properties, fracture analysis.

coir fibers, Polyester composites, Tensile properties, fracture analysis.

Como citar

Lopes, Felipe Perisse Duarte; Jr, Helvio Pessanha Guimarães Santafé; Monteiro, Sergio Neves. MECHANICAL PROPERTIES OF TENSILE TESTED COIR FIBER REINFORCED POLYESTER COMPOSITES, p. 4989-4995. In: 65º Congresso ABM, Rio de Janeiro, 2010.
ISSN: 2594-5327, DOI 10.5151/2594-5327-32365