Powered by Blucher Proceedings

Anais dos Seminários de Redução, Minério de Ferro e Aglomeração


ISSN 2594-357X

Título

REDUCE CO2 EMISSIONS AND COSTS IN BLAST FURNACE OPERATION WITH PULVERIZED COAL INJECTION

REDUCE CO2 EMISSIONS AND COSTS IN BLAST FURNACE OPERATION WITH PULVERIZED COAL INJECTION

Autoria

DOI

10.5151/2594-357X-31464

Downloads

1010 Downloads

Resumo

The blast furnace process is the most important process to produce pig iron. The necessary process energy is mainly covered by coke. A significant measure to reduce the coke rate and with it the CO2-emissions plus costs is pulverized coal injection (PCI) through the tuyeres into the blast furnace. This article is based on technical studies of Dr.- Ing. Robin Schott and Dr.- Ing. Franz Reufer comparisons and shows the cost effectiveness and the decrease of CO2-emissions with the help of simplified energy balances for the operation using pulverized coal injection and the operation using the Oxycoal+ technology.

 

The blast furnace process is the most important process to produce pig iron. The necessary process energy is mainly covered by coke. A significant measure to reduce the coke rate and with it the CO2-emissions plus costs is pulverized coal injection (PCI) through the tuyeres into the blast furnace. This article is based on technical studies of Dr.- Ing. Robin Schott and Dr.- Ing. Franz Reufer comparisons and shows the cost effectiveness and the decrease of CO2-emissions with the help of simplified energy balances for the operation using pulverized coal injection and the operation using the Oxycoal+ technology.

Palavras-chave

Blast furnace; Pulverized coal injection (PCI); Oxycoal+ technology, decrease of CO2-emissions; Reduction in costs

Blast furnace; Pulverized coal injection (PCI); Oxycoal+ technology, decrease of CO2-emissions; Reduction in costs

Como citar

Maier, Andreas; Fabiana Costa; Barros, Joaquim Luiz Monteiro de. REDUCE CO2 EMISSIONS AND COSTS IN BLAST FURNACE OPERATION WITH PULVERIZED COAL INJECTION, p. 134-144. In: 48° Seminário de Redução de Minérios e Matérias-primas, São Paulo, 2018.
ISSN: 2594-357X, DOI 10.5151/2594-357X-31464