Powered by Blucher Proceedings

Anais dos Seminários de Redução, Minério de Ferro e Aglomeração


ISSN 2594-357X

Título

SINTER SCREENING RATE CONTROL IN BLAST FURNACE

SINTER SCREENING RATE CONTROL IN BLAST FURNACE

Autoria

DOI

10.5151/2594-357X-22378

Downloads

7 Downloads

Resumo

One of the most important step of ironmaking process is the raw materials screening. In order to obtain a particle size distribution adequate for a good furnace permeability is requested to optimize the system capacity to remove the < 5 mm particles from sinter oversize. The blast furnace charging systems can suffer a great project change or a study to optimize its efficiency. This paper shows the work of study and improvement on its efficiency of the sinter screening system based on the control of the screening rate (measured in kg/s). The rate was adjusted from sampling and analysis of sinter particle size distribution on different raw materials condition. The result is a reduction on percentage of <5mm particles in the oversize charged in blast furnace.

 

One of the most important step of ironmaking process is the raw materials screening. In order to obtain a particle size distribution adequate for a good furnace permeability is requested to optimize the system capacity to remove the < 5 mm particles from sinter oversize. The blast furnace charging systems can suffer a great project change or a study to optimize its efficiency. This paper shows the work of study and improvement on its efficiency of the sinter screening system based on the control of the screening rate (measured in kg/s). The rate was adjusted from sampling and analysis of sinter particle size distribution on different raw materials condition. The result is a reduction on percentage of <5mm particles in the oversize charged in blast furnace.

Palavras-chave

Blast furnace; Screening; Sinter; Oversize.

Blast furnace; Screening; Sinter; Oversize.

Como citar

Moreira, Fabiano de Souza; Silva, Luiz Eustaquio da; Castro, Alison Coelho de; Bicalho, Fabiano Soares; Yano., Fernando Issao; Matos, Ulysses Forastieri de; Abreu, João Felipe Araújo Carneiro de. SINTER SCREENING RATE CONTROL IN BLAST FURNACE, p. 2025-2030. In: 42º Seminário de Redução de Minério de Ferro e Matérias-primas / 13º Seminário Brasileiro de Minério de Ferro / 6th International Congress on the Science and Technology of Ironmaking, Rio de Jabeiro, 2012.
ISSN: 2594-357X, DOI 10.5151/2594-357X-22378