Título

A PRELIMINARY STUDY OF THERMO-MECHANICAL STABILITY OF CARBON S-PHASE FORMED IN AUSTENITIC STAINLESS STEEL

A PRELIMINARY STUDY OF THERMO-MECHANICAL STABILITY OF CARBON S-PHASE FORMED IN AUSTENITIC STAINLESS STEEL

Autoria

Li, Wei; Chiu, Yu Long; Dong, Hanshan

Li, Wei

Eu sou esse autor

Chiu, Yu Long

Eu sou esse autor

Dong, Hanshan

Eu sou esse autor

DOI

10.5151/2594-5327-17006

Downloads

Resumo

Carbon S-phase was generated in the surface of AISI316 austenitic stainless steel by plasma carburising at 500°C for 10h in a gas mixture of 1.5%CH4 and 98.5%H2. The thermo-mechanical stability of the carbon S-phase was studied by stressing the ‘dog- bone’ tensile specimens in the range of 0-200MPa at temperatures ranging from 400 to 500°C for 100-150h. Post-test characterisation was conducted using XRD, SEM, TEM and micro-indentation. The experimental results demonstrate that when tested at a fix temperature the thickness of the carbon S-phase layer increased with the stress applied to the tensile specimens during the thermo-mechanical stability tests. This indicates that tensile stress promotes the diffusion of carbon in the carbon-S-phase. When stressed at 400°C the microstructure of the carbon S-phase was not affected by the stress level; however, when stressed at 450 and 500°C for 100MPa or above, the corrosion resistance of the carbon S-phase slightly deteriorated. The application of a tensile stress during annealing of S-phase layer can retard the deduction of its hardness. This is believed to be related to the early stage precipitation of carbides in the S-phase, which could be facilitated by the applied tensile stress during thermal annealing.

Carbon S-phase was generated in the surface of AISI316 austenitic stainless steel by plasma carburising at 500°C for 10h in a gas mixture of 1.5%CH4 and 98.5%H2. The thermo-mechanical stability of the carbon S-phase was studied by stressing the ‘dog- bone’ tensile specimens in the range of 0-200MPa at temperatures ranging from 400 to 500°C for 100-150h. Post-test characterisation was conducted using XRD, SEM, TEM and micro-indentation. The experimental results demonstrate that when tested at a fix temperature the thickness of the carbon S-phase layer increased with the stress applied to the tensile specimens during the thermo-mechanical stability tests. This indicates that tensile stress promotes the diffusion of carbon in the carbon-S-phase. When stressed at 400°C the microstructure of the carbon S-phase was not affected by the stress level; however, when stressed at 450 and 500°C for 100MPa or above, the corrosion resistance of the carbon S-phase slightly deteriorated. The application of a tensile stress during annealing of S-phase layer can retard the deduction of its hardness. This is believed to be related to the early stage precipitation of carbides in the S-phase, which could be facilitated by the applied tensile stress during thermal annealing.

Palavras-chave

Plasma carburising; S-phase; Stability; Stress.

Plasma carburising; S-phase; Stability; Stress.