Anais do Congresso Anual da ABM


ISSN 2594-5327

Título

ESTRUTURA E COMPORTAMENTO MECÂNICO DA LIGA CU-13,8%AL-4%NI POLICRISTALINA PRODUZIDA PELA TÉCNICA DE FUSÃO A PLASMA

STRUCTURE AND MECHANICAL BEHAVIOUR OF A CU-13.8AL-4NI POLYCRYSTALLINE ALLOY PRODUCED BY PLASMA FUSION TECHNIQUE

DOI

10.5151/2594-5327-21371

Downloads

Baixar Artigo 91 Downloads

Resumo

O Efeito de Memória de Forma (EMF), uma propriedade que algumas ligas especiais conseguem apresentar, tem grande valor científico e tecnológico. As ligas à base do composto intermetálico Cu3Al são exemplos de ligas que exibem este tipo de efeito devido às transformações martensíticas reversíveis. Neste presente trabalho foi estudada a liga policristalina Cu-13,8%Al-4%Ni (% em peso) produzida pela técnica de fusão a plasma, no estado fundido. A caracterização estrutural da liga foi feita através da microscopia ótica, difração de raios X, Microscopia Eletrônica de Varredura (MEV), teste de resistividade elétrica e ensaios de microdureza Vickers. A liga apresenta homogeneidade química e em composição fásica, com uma microestrutura composta por grãos equiaxiais não uniformes, revelando no seu interior finas lamelas martensíticas. As fases presentes são identificadas como as martensíticas γ’1, β’1, as fases R e β1. A microdureza média e a resistividade da liga foram determinadas como 309 HV e 7,12 μΩcm. No ensaio mecânico de compressão, a liga apresentou um comportamento elástico com estreita região plástica antes da fratura.

 

The Shape Memory Effect (SME), a property that can present some special alloys, has great scientific and technological value. The alloys of the intermetallic compound Cu3Al are examples of alloys that exhibit this type of effect due to reversible martensitic transformation. In this study, the polycrystalline alloy Cu-13.8% Al-4% Ni (weight%) with SME produced by the melting technique in plasma, in the molten state. The structural characterization of the alloy was performed by optical microscopy, X-ray diffraction, Scanning Electronic Microscopy (SEM), electrical resistivity testing and Vickers microhardness. The alloy has uniform chemical and phasic composition with an equiaxed grains microstructure comprising not uniform, showing therein fine martensitic plates. The phases present are identified as the martensitic γ'1, β'1, the phase R and β1 high temperature, all sorted. The average microhardness and resistivity of the alloy were determined as 309 HV and 7,12 μΩcm. During the compression mechanical test, the alloy showed an elastic behavior with a narrow plastic region before fracture.

Palavras-chave

Liga de Cu-Al-Ni; Análise estrutural; Transformações martensíticas reversíveis.

Alloy Cu-Al-Ni; Structural analysis; Reversible martensitic transformation.

Como citar

Lima, Pedro Augusto Silva de; Matlakhov, Anatoliy Nikolaevich; Matlakhova, Lioudmila Aleksandrovna; Araújo, Carlos José de. ESTRUTURA E COMPORTAMENTO MECÂNICO DA LIGA CU-13,8%AL-4%NI POLICRISTALINA PRODUZIDA PELA TÉCNICA DE FUSÃO A PLASMA , p. 2919-2929. In: 67º Congresso da ABM - Internacional / 12º ENEMET - Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas, Rio de Jabeiro, 2012.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-21371