Anais do Congresso Anual da ABM


ISSN 2594-5327

69° Congresso Anual da ABM - Internacional vol. 69, num.69 (2014)


Título

ESTUDO DA REVERSÃO DA AUSTENITA EM UM AÇO INOXIDÁVEL MARTENSÍTICO-FERRÍTICO

STUDY OF THE AUSTENITE REVERSION IN A MARTENSITIC-FERRITIC STAINLESS STEEL

DOI

10.5151/1516-392X-24383

Downloads

Baixar Artigo 300 Downloads

Resumo

A evolução da microestrutura de um aço inoxidável bifásico com estrutura martensítico-ferrítica (AIMF) desenvolvido pela Vallourec Tubos do Brasil S.A. foi estudada durante o tratamento térmico de revenimento através de medições in situ das frações de fase por difração de raios X. Para a liga de AIMF o revenimento é realizado para ajuste das propriedades do material e assim como ocorre com as ligas de aço inoxidável supermartensítico (AIS), este tratamento é realizado em temperaturas intercríticas. Após o resfriamento, uma quantidade da austenita revertida pode se transformar novamente em martensita enquanto outra pode permanecer retida na estrutura. Para conhecer melhor a ocorrência deste fenômeno para a liga de AIMF é essencial avaliar a sua evolução microestrutural durante o revenimento. Neste trabalho, a reversão da austenita em diferentes temperaturas de revenimento foi analisada através de difração de raios X in situ. As amostras foram também caracterizadas por microscopia eletrônica de varredura. A propriedade mecânica após diferentes condições de revenimento foi avaliada em ensaio de tração. Foi observado que há uma temperatura crítica em que a austenita revertida se torna mais estável e não se transforma durante o resfriamento subsequente.

 

The microstructural evolution of a dual-phase stainless steel with a martensitic-ferritic structure (AIMF) developed by Vallourec Tubos do Brasil S.A. was investigated using in-situ high temperature X-ray diffraction. The tempering of this alloy is performed for adjustment of properties, and such treatment is accomplished at intercritical temperatures. After cooling, some amount of this reversed austenite may transform into untempered martensite while other part stay retained. To better understand such phenomenon for an AIMF alloy it is essential to evaluate the evolution and the relationship between these microstructures during tempering. In this work, the formation of reversed austenite was analyzed by means of HT-XRD at different temperatures. Specimens were also characterized using scanning electron microscopy. A mechanical property as strength was evaluated at different tempering conditions. It was observed that there is a critical tempering temperature in which reverted austenite tends to stabilize and remain untransformed during cooling.

Palavras-chave

Aço inoxidável bifásico; Austenita retida; Reversão da austenita

Dual-phase stainless steel; Retained austenite; Austenite reversion

Como citar

Tatiane Augusta Almeida dos Santos; Ricardo Nolasco de Carvalho; Adriana da Cunha Rocha; Marcelo de Almeida Cunha Ferreira; Vicente Tadeu Lopes Buono. ESTUDO DA REVERSÃO DA AUSTENITA EM UM AÇO INOXIDÁVEL MARTENSÍTICO-FERRÍTICO , p. 6385-6392. In: 69° Congresso Anual da ABM - Internacional, São Paulo - Brasil, 2014.
ISSN: 2594-5327 , DOI 10.5151/1516-392X-24383