Anais do Congresso Anual da ABM


ISSN 2594-5327

74º Congresso Anual da ABM vol. 74, num.74 (2019)


Título

ESTUDO DE PRISMAS DE BLOCOS DE CONCRETO PARCIALMENTE ARGAMASSADOS COM ARGAMASSAS DE ASSENTAMENTO DE DIFERENTES RESISTÊNCIAS

STUDY OF FACE SHELL BEDDING CONCRETE BLOCKS PRISMS WITH DIFFERENTS SEATING MORTAR RESISTANCE

DOI

10.5151/2594-5327-33244

Downloads

Baixar Artigo 119 Downloads

Resumo

A alvenaria estrutural possui como característica básica o uso das paredes portantes, formadas com blocos estruturais unidos por argamassa de assentamento. São muitas as vantagens atribuídas a esse sistema, entretanto as mais enfáticas são a diminuição do custo e do tempo de execução da obra. As componentes básicas da alvenaria são as unidades e a argamassa de assentamento, sendo assim, essas requerem um controle efetivo de suas qualidades. Os blocos devem possuir resistência à compressão compatível com as cargas aos quais serão submetidos, e a argamassa de assentamento deve desenvolver resistência adequada a fim de não comprometer a estrutura da qual faz parte, não devendo ser mais resistente que o bloco, e ainda assim absorver as deformações as quais a alvenaria for submetida. No processo construtivo, o tipo de assentamento pode ser determinante na produção e no rendimento da obra. Dois tipos são recomendados, o argamassamento total e o parcial, onde a argamassa é colocada somente nos septos longitudinais do bloco. Sendo assim, este trabalho tem como objetivo ensaiar à compressão prismas de blocos de concreto argamassados parcialmente com dois traços de argamassas de assentamento mistas de diferentes resistências à compressão. Conclui-se que o crescimento da resistência à compressão da argamassa de assentamento influi no aumento da resistência à compressão dos prismas com argamassamento parcial.

 

The structural masonry has as basic characteristic the use of the supporting walls, formed with structural blocks joined by seating mortar. There are many advantages attributed to this system, however the most emphatic are the reduction of the cost and time of execution of the work. The basic components of the masonry are the units and the seating mortar, so they require effective control of their qualities. The blocks must have compressive strength compatible with the loads to which they will be subjected, and the mortar must be adequately resisted in order not to compromise the structure of which it is part, and must not be more resistant than the block, and still absorb the deformations to which the masonry is subjected.In the construction process, the mortar bedding type can be decisive in the production and the yield of the work. Two types are recommended, full bedding, covering net área for unit and face sheel bedding, where the mortar is placed only in the face shell area of the block. this work aims to test the compression of face shell bedding concrete blocks prisms with two traces of mixed mortar with different compressive strength. It is concluded that the increase of the compressive strength of the mortar influences the increase in the compressive strength of the prisms with face shell bedding type.

Palavras-chave

Alvenaria estrutural; Prisma; Argamassa; Resistência.

Structural Masonry; Prism; Mortar; Resistance.

Como citar

Lima, Thuany Espírito Santo de; Alexandre, Jonas; Azevedo, Afonso Rangel Garcez de; Marvila, Markssuel Teixeira; Zanelato, Euzébio Bernabé; Monteiro, Sérgio Neves. ESTUDO DE PRISMAS DE BLOCOS DE CONCRETO PARCIALMENTE ARGAMASSADOS COM ARGAMASSAS DE ASSENTAMENTO DE DIFERENTES RESISTÊNCIAS , p. 608-613. In: 74º Congresso Anual da ABM, São Paulo, 2019.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-33244