Anais do Congresso Anual da ABM


ISSN 2594-5327

68º Congresso da ABM vol. 68, num.68 (2013)


Título

RESISTÊNCIA À CORROSÃO DE AÇOS AUSTENÍTICOS UTILIZADOS EM UMA PLANTA DE PRODUÇÃO DE BIODIESEL

CORROSION RESISTANCE OF AUSTENITIC STEELS USED IN A BIODIESEL PRODUCTION PLANT

DOI

10.5151/2594-5327-23107

Downloads

Baixar Artigo 168 Downloads

Resumo

Neste trabalho, foi avaliada a resistência à corrosão dos aços inoxidáveis AISI 304L, AISI 316L, AISI 317L e AISI 904L em meios de glicerina A (carga 11.000 kg/h) e glicerina B (carga 6.500 kg/h). Para tal utilizou-se o teste de potencial de circuito aberto (OCP), a técnica de espectroscopia de impedância eletroquímica (EIS) e o teste de polarização potenciodinâmica. A partir dos testes de OCP observou-se que o potencial de corrosão do aço AISI 904L é maior do que os demais, possuindo menor tendência de sofrer corrosão no meio de glicerina ácida. De acordo com os valores da resistência à polarização obtidos, verificou-se que os aços inoxidáveis AISI 317L e AISI 904L apresentaram valores de resistência de polarização uma ordem de grandeza maior que os demais. Somente em meio de glicerina B foi possível visualizar o potencial de pite, que foi maior para os aços AISI 317L e AISI 904L. Conclui-se que o aço AISI 317L é o mais indicado para o uso em serviço, já que o mesmo se apresenta resistente à corrosão no meio ácido e possui menor custo quando comparado ao aço AISI 904L.

 

In this study, the corrosion resistance of the AISI 304L, AISI 316L, AISI 317L and AISI 904L steels was evaluated in media of glycerin A (load 11,000 kg/h) and glycerin B (load 6,500 kg/h). The measurement of open circuit potential, the electrochemical impedance spectroscopy (EIS) and potentiodynamic anodic polarization were used in this study. The corrosion potential of the steel AISI 904L was the highest, and the AISI 904L steel showed the slightest tendency to corrode in medium of acid glycerin. The AISI 317L and AISI 904L steels showed values of polarization resistance an order of magnitude greater than the values observed for the other steels. In medium of glycerin B, the pitting potential was identified, and the AISI 317 and AISI 904 steels showed higher values of pitting potential than the steels studied. The steel AISI 317L can be applied in biodiesel plant due to its low cost and high corrosion resistance in media of acid glycerin.

Palavras-chave

Corrosão; Biodiesel; Aço inoxidável.

Corrosion; Biodiesel; Stainless steel.

Como citar

Pereira, Amanda Petronilha; Silva, Layane Isabelli da; SouzaTorres, Carlos Eduardo de Almeida; Lins, Vanessa de Freitas Cunha; Castro, Maria das Mercês Reis de. RESISTÊNCIA À CORROSÃO DE AÇOS AUSTENÍTICOS UTILIZADOS EM UMA PLANTA DE PRODUÇÃO DE BIODIESEL , p. 1619-1629. In: 68º Congresso da ABM, São Paulo, 2013.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-23107