Login

Proceedings of ABM Annual Congress

ISSN 2594-5327

65º Congresso ABM — vol. 65, num.65 (2010)

Title

EFFECT OF FIBER ADDITION ON MECHANICAL PROPERTIES OF CONTINUOUS MIRITI FIBERS REINFORCED POLYMER COMPOSITES

EFFECT OF FIBER ADDITION ON MECHANICAL PROPERTIES OF CONTINUOUS MIRITI FIBERS REINFORCED POLYMER COMPOSITES

Authorship

Santos, Nubia; Silva, Manoel; Sanchez, Elisabete; Zavaglia, Cecilia; Albuquerque, Eder

Santos, Nubia
Santos, Nubia

I am this author

Silva, Manoel
Silva, Manoel

I am this author

Sanchez, Elisabete
Sanchez, Elisabete

I am this author

Zavaglia, Cecilia
Zavaglia, Cecilia

I am this author

Albuquerque, Eder
Albuquerque, Eder

I am this author

DOI

10.5151/2594-5327-34706

Downloads

heading.download_article_detail 40 Downloads

Abstract

In this study the effect of the addition of miriti fibers on an unsaturated polyester matrix on volume fraction up to 30% was investigated. The miriti fibers are extracted from Mauritia flexuosa L. palm, and were treated with a NaOH aqueous solution (5%), in order to improve the interfacial adhesion between fiber-polymer. The composites were consolidated in a steel mold under pressure for 24 h, and post-cured in an oven at 60°C for also 24 hours. The TGA analysis were conducted to evaluate the thermal behavior of the composites with fibers addition. Tensile tests were carried out on unidirectional fiber composites and the results indicated an increase in elastic modulus comparing with UP matrix. The SEM micrographs were used to show the fiber/matrix interfacial adhesion for composites after the fracture under tension.

 

In this study the effect of the addition of miriti fibers on an unsaturated polyester matrix on volume fraction up to 30% was investigated. The miriti fibers are extracted from Mauritia flexuosa L. palm, and were treated with a NaOH aqueous solution (5%), in order to improve the interfacial adhesion between fiber-polymer. The composites were consolidated in a steel mold under pressure for 24 h, and post-cured in an oven at 60°C for also 24 hours. The TGA analysis were conducted to evaluate the thermal behavior of the composites with fibers addition. Tensile tests were carried out on unidirectional fiber composites and the results indicated an increase in elastic modulus comparing with UP matrix. The SEM micrographs were used to show the fiber/matrix interfacial adhesion for composites after the fracture under tension.

Keywords

Polyester

.

How to refer

Santos, Nubia; Silva, Manoel; Sanchez, Elisabete; Zavaglia, Cecilia; Albuquerque, Eder. EFFECT OF FIBER ADDITION ON MECHANICAL PROPERTIES OF CONTINUOUS MIRITI FIBERS REINFORCED POLYMER COMPOSITES , p. 5462-5462. In: 65º Congresso ABM, Rio de Janeiro, 2010.
ISSN: 2594-5327 , DOI 10.5151/2594-5327-34706