ISSN 2594-5327
67th ABM International Congress - 12th ENEMET — Vol. 67, Num. 67 (2012)
Title
Authorship
DOI
Downloads
Abstract
Durante a etapa de alívio de tensões, frequentemente aplicada antes do tratamento criogênico em aços ferramenta para evitar trincas e falhas catastróficas, ocorre o envelhecimento da martensita. Foram realizados ensaios utilizando métodos globais (ruído magnético de Barkhausen, dilatometria e potencial termo-elétrico) e métodos locais (metalografia e difração de raios-X) para acompanhar este fenômeno. Foi verificado, no aço AISI D2, que devido ao envelhecimento da martensita ocorre enriquecimento da austenita em carbono com consequente estabilização e aumento da fração volumétrica da mesma.
During the stress relief stage, often applied prior to the cryogenic treatment of tool steels, to prevent cracks and catastrophic failure, a martensite aging occurs. Tests using global methods (Barkhausen magnetic noise, dilatometry and thermo-electric power) as well as local methods (metallography and X-ray diffraction) were conducted to follow up this phenomenon. It was found, in the AISI D2 steel, that owing to martensite aging there is an austenite carbon enrichment , resulting in austenite stabilization and increase in the austenite volume fraction.
Keywords
Envelhecimento; Reversão da austenita; Estabilização da austenita.
Aging; Austenite reversion; Austenite stabilization.
How to cite
Farina, Paula Fernanda da Silva; Farina, Alexandre Bellegard; Barbosa, Celso Antonio; Goldenstein, Hélio.
ENVELHECIMENTO DA MARTENSITA DURANTE O
ALÍVIO DE TENSÕES EM UM AÇO AISI D2,
p. 1874-1883.
In: 67th ABM International Congress - 12th ENEMET,
Rio de Jabeiro,
2012.
ISSN: 2594-5327, DOI 10.5151/2594-5327-21175