ISSN 2594-5327
69° Congresso Anual da ABM - Internacional — vol. 69, num.69 (2014)
Title
Authorship
DOI
Downloads
Abstract
Os aços com um alto teor de Mn (15-30%) e os elementos de liga, Si e Al, apresentam plasticidade excepcional devido à geração de maclas de deformação (efeito TWIP) ou múltiplas transformações martensíticas (efeito TRIP). Este trabalho avaliou a evolução microestrutural, a formação da textura e sua influência sobre o comportamento mecânico de um aço contendo 17%Mn-0,06%C laminado a frio com reduções de 45% e 90%, e recozimentos a 700°C durante tempos diferentes. A microestrutura foi analisada por microscopia óptica e eletrônica de varredura, EBSD e difração de raios X. A redução um frio favorece a formação da martensita a'. No aço recozido estão presentes as fases martensita a? e e e austenita. O limite de escoamento e de resistência à tração alcançaram 750 e 950 MPa, respectivamente, com o alongamento total de 45%, confirmando sua alta capacidade de encruamento. A reversão da martensita para austenita ocorre simultaneamente com a recristalização desta.
Steels containing high contents of Mn, Si and Al have great plasticity when deformed due to TWIP or TRIP effects. This work evaluated the microstructural evolution, texture formation and its influence on the mechanical behavior of a steel containing 17%Mn and 0.06%C after cold rolling to 45% and 90% of reduction, and annealing at 700°C for different times. The microstructures were analyzed by optical and scanning electron microscopy. Volume fraction of the phases ?, ? and ?' martensites were measured by X-ray diffraction and EBSD technique. It was found that cold reduction increases the ?' martensite volume fraction. The relative phase amounts showed that the sample annealed for the longest time, 1000 s, still presents ? and ?' martensite. The yield and tensile strength for annealing condition reach values close to 750 and 950 MPa, respectively, with total elongation of 45%, confirm the high work hardening rate of the analyzed steel.
Keywords
Aço alto manganês; Aço TRIP; Aço TWIP; Martensita
Manganese steel; Hot rolling; Cold rolling; Recrystallization; TRIP steel
How to refer
Sara Silva Ferreira de Dafé;
Alessandra Cunha Ferreira;
Isabela Viegas Aguiar;
Dagoberto Brandão Santos;
Diana Maria Péres Escobar.
EVOLUÇÃO MICROESTRUTURAL, TEXTURA E COMPORTAMENTO MECÂNICO DO AÇO TRIP/TWIP 17Mn-0,06C APÓS LAMINAÇÃO A QUENTE, A FRIO E RECOZIMENTO
,
p. 8732-8743.
In: 69° Congresso Anual da ABM - Internacional,
São Paulo - Brasil,
2014.
ISSN: 2594-5327
, DOI 10.5151/1516-392X-25037