ISSN 2594-5297
58º Seminário de Laminação, Conformação de Metais e Produtos — vol. 58, num.58 (2023)
Title
Authorship
DOI
Downloads
Abstract
Cross wedge rolling is a complex and widely applied process to produce stepped shafts and preforms for the forging industry. The design of process tools represents a considerable challenge, and their geometric parameters control the tendency to generate defects. In this work, numerical simulation was applied to expose the specificities of the cross-wedge rolling tool designed. Finite element analysis was employed to define the optimum parameters for generating an axisymmetric preform for the forging process. In addition, the effects of the tool geometry parameters on product qualities was extensively discussed.
Cross wedge rolling is a complex and widely applied process to produce stepped shafts and preforms for the forging industry. The design of process tools represents a considerable challenge, and their geometric parameters control the tendency to generate defects. In this work, numerical simulation was applied to expose the specificities of the cross-wedge rolling tool designed. Finite element analysis was employed to define the optimum parameters for generating an axisymmetric preform for the forging process. In addition, the effects of the tool geometry parameters on product qualities was extensively discussed.
Keywords
Cross wedge rolling; Finite element analysis; Tool Design
Cross wedge rolling; Finite element analysis; Tool Design
How to refer
Rosiak, André;
Santos, Thomas Gomes dos;
Cabral, Felipe Barbosa;
Schaeffer, Lírio.
INVESTIGATION OF THE CROSS WEDGE ROLLING PROCESS
,
p. 228-241.
In: 58º Seminário de Laminação, Conformação de Metais e Produtos,
São Paulo,
2023.
ISSN: 2594-5297
, DOI 10.5151/2594-5297-39836
