Login

Proceedings of the Ironmaking, Iron Ore and Agglomeration Seminars

ISSN 2594-357X

7° Simpósio Brasileiro de Aglomeração de Minérios — vol. 7, num.7 (2019)

Title

ON THE DIFFERENCE BETWEEN ISOTHERMAL AND NON-ISOTHERMAL REDUCTION TESTS: A COMPARISON BETWEEN COREM R180 AND ISO DR90

ON THE DIFFERENCE BETWEEN ISOTHERMAL AND NON-ISOTHERMAL REDUCTION TESTS: A COMPARISON BETWEEN COREM R180 AND ISO DR90

Authorship

Laforest, Guylaine; Dubé, Mathieu; Lacroix, Olivier

Laforest, Guylaine
Laforest, Guylaine

I am this author

Dubé, Mathieu
Dubé, Mathieu

I am this author

Lacroix, Olivier
Lacroix, Olivier

I am this author

DOI

10.5151/2594-357X-33914

Downloads

heading.download_article_detail 634 Downloads

Abstract

The reduction behavior of iron ore pellets in gas-based DR shaft processes has been studied at COREM since the late 80s. At that time, a new DR characterization test called COREM R180 was developped in collaboration with ArcelorMittal Mines Canada (former Quebec Cartier Mining) and ArcelorMittal Long Products Canada (former ISPAT Sidbec Inc.). This paper describes COREM’s approach to improve its understanding of the relations between iron ore pellet microstructure and pellet quality. The differences between the DR90 and the R180 tests are discussed. The evolution of the microstructure during reduction of both tests is also described. The reduction steps during the two tests are put forward as an important factor impacting the microstructural changes as well as the test results.

 

The reduction behavior of iron ore pellets in gas-based DR shaft processes has been studied at COREM since the late 80s. At that time, a new DR characterization test called COREM R180 was developped in collaboration with ArcelorMittal Mines Canada (former Quebec Cartier Mining) and ArcelorMittal Long Products Canada (former ISPAT Sidbec Inc.). This paper describes COREM’s approach to improve its understanding of the relations between iron ore pellet microstructure and pellet quality. The differences between the DR90 and the R180 tests are discussed. The evolution of the microstructure during reduction of both tests is also described. The reduction steps during the two tests are put forward as an important factor impacting the microstructural changes as well as the test results.

Keywords

Iron ore pellets, Optical microscopy, metallisation, Direct reduction, DR90, COREM R180.

Iron ore pellets, Optical microscopy, metallisation, Direct reduction, DR90, COREM R180.

How to refer

Laforest, Guylaine; Dubé, Mathieu; Lacroix, Olivier. ON THE DIFFERENCE BETWEEN ISOTHERMAL AND NON-ISOTHERMAL REDUCTION TESTS: A COMPARISON BETWEEN COREM R180 AND ISO DR90 , p. 340-351. In: 7° Simpósio Brasileiro de Aglomeração de Minérios, São Paulo, 2019.
ISSN: 2594-357X , DOI 10.5151/2594-357X-33914