Title

THE EFFECT OF ARCSAVETM ON THE EAF PROCESS WITH ECCENTRIC BOTTOM TAPPING

Authorship

Lidong Teng1 Helmut Hackl2 Leonardo Machado de Rezende3,

Lidong Teng1 Helmut Hackl2 Leonardo Machado de Rezende3,

I am this author

DOI

10.5151/1982-9345-26378

Downloads

Abstract

ArcSaveTM is a new generation of electromagnetic stirrer (EMS) from ABB for electric arc furnace (EAF) operation. Its goal is to improve the safety, increase the productivity and reduce costs. Electromagnetic stirring in the melt bath during arc furnace operation will affect the scrap smelting, bath temperature distribution, refining reactions, and also the tapping practice. This paper has summarized the investigation results obtained from the first ArcSaveTM system installed in a 90 ton EBT arc furnace in USA. The hot test results show that ArcSaveTM has enhanced the heat and mass transfer in the arc furnace process. This results in a faster scrap melting rate, lower slag superheat during arcing, more homogenous melt bath, higher decarburization rate and higher EBT free opening frequency. ArcSaveTM has also reduced the tapping temperature and tapping oxygen in the steel. This brings a higher scrap yield and saves ferroalloy consumption in the downstream ladle furnace operation. The lower energy consumption, short tap-to-tap time, and consistent furnace operation bring increased productivity and safety.

Keywords

Electric arc furnace, ArcSaveTM, steel yield, EBT tapping, EMS

Electric arc furnace, ArcSaveTM, steel yield, EBT tapping, EMS