Powered by Blucher Proceedings

Anais do Congresso Anual da ABM


ISSN 2594-5327

66º Congresso Anual da ABM Vol. 66, Num. 66 (2011)


Título

INFLUÊNCIA DOS ELEMENTOS DE LIGA NA RESISTÊNCIA AO DESGASTE E ENCRUAMENTO NOS AÇOS HADFIELD

THE INFLUENCE OF ALLOY ELEMENTS IN THE RESISTANCE OF HARDENING AND WEAR IN HADFIELD STEEL

Autoria

DOI

10.5151/2594-5327-17973

Downloads

326 Downloads

Resumo

O aço austenítico manganês, descoberto inicialmente por Robert Hadfield em 1882, conhecido atualmente como aço Hadfield, continha em sua configuração inicial 12% de manganês e 1,2% de carbono. Apresentando grande resistência ao desgaste, provavelmente o maior na categoria de aciaria, ganhou rápida aceitação no mercado, sendo então propostas várias alterações em sua composição, como a introdução de vários elementos de liga, como o vanádio, molibdênio, titânio, enxofre, fósforo, cromo, níquel entre outros. Este trabalho investigou a influência dos elementos de liga na resistência ao desgaste e no encruamento sofrido por esse material, em quatro composições que se diferenciam nos elementos de liga e em suas porcentagens. A resposta foi uma grande resistência ao desgaste da liga contendo titânio, entretanto esta não apresentou a maior profundidade de camada encruada.

 

The austenitic steel , that was discovery by Robert Hadfield in 1882 , is known as Hadfield steel and there was 12% of manganese and 1,2% of carbon on the configuration. Its presents high resistance to wear and hardening . These properties become the Hadfield steel a good acceptance in the market . Then some proposals of modifications were on its composition as the introduction of alloys elements as vanadium, molybdenum, titanium, sulfur, phosphorus, chromium, nickel and so on. This work has been studied the influence of alloy elements on resistance of hardening and wear using four distinct compositions of alloy elements and results were that composition of titanium presented the bigger resistance to wear than other composition but its not presented biggest depth in hardening layer.

Palavras-chave

Composição; Desgaste; Encruamento; Aço hadfield.

Composition; Wear; Hardening; Hadfield steel.

Como citar

Lima, Guilherme da Rocha; Imaizumi, Momotaro; Sanchez, Luiz Eduardo de Ângelo; Soufen, Carlos Alberto; Mello, Hamilton José de. INFLUÊNCIA DOS ELEMENTOS DE LIGA NA RESISTÊNCIA AO DESGASTE E ENCRUAMENTO NOS AÇOS HADFIELD, p. 1721-1729. In: 66º Congresso Anual da ABM, São Paulo, 2011.
ISSN: 2594-5327, DOI 10.5151/2594-5327-17973