ISSN 2594-5327
61º Congresso Anual da ABM — Vol. 61, Num. 61 (2006)
Title
DOI
Downloads
Abstract
O processo com eletrodo tubular (FCAW) tem crescido em utilização nos últimos tempos em função de suas características de alta taxa de deposição associado à adequadas propriedades mecânicas da junta soldada. Entretanto, muitos aspectos ainda permanecem obscuros com relação a uma maior utilização deste processo. Desta forma, este trabalho tem por finalidade, a análise e otimização dos parâmetros de soldagem: tensão, velocidade de alimentação do arame e distância bico de contato peça, em um processo com arame tubular com proteção gasosa, sobre a penetração e o índice de convexidade da solda. Através de técnicas estatísticas, desenvolveu-se o modelamento matemático e posterior otimização das respostas. Em função dos resultados obtidos, observou-se forte influência da velocidade de alimentação do arame no processo, seguido pela tensão e com menos intensidade pela distância bico de contato peça. Testes posteriores mostraram uma adequada previsão dos resultados dos modelos matemáticos frente aos resultados reais.
The process with tubular electrode (FCAW) has grown in use in the last times in function of its characteristics of high rate of deposition associated with the adjusted mechanical properties of the joint welded. However, many aspects still remain obscure with regard to a bigger use of this process. So, this work has for purpose, the analysis and optimization of the welding parameters: tension, speed of feeding of the wire and distance contact peak, in a process with tubular wire with gaseous protection, on the penetration and the index of convexity of the weld. Through statistical techniques, the mathematical model was developed and subsequent optimization of the answers. In function of the results, strong influence of the speed of feeding of the wire in the process was observed, followed for the tension and with little intensity for the distance contact peak.
Keywords
FCAW; RSM; Soldagem; Otimização.
FCAW; RSM; Welding; Optimization.
How to cite
Rodrigues, Lucilene de Oliveira; Costa, Sebastião Carlos da.
ANÁLISE DE PARÂMETROS E OTIMIZAÇÃO DO PROCESSO DE SOLDAGEM COM ELETRODO TUBULAR, ANALISANDO CARACTERÍSTICAS DE GEOMETRIA DO CORDÃO,
p. 3423-3432.
In: 61º Congresso Anual da ABM,
Rio de Janeiro,
2006.
ISSN: 2594-5327, DOI 10.5151/2594-5327-2005-14580-0383