Powered by Blucher Proceedings

Seminário de Laminação, Conformação de Metais e Produtos

ISSN 2594-5297

56° Seminário de Laminação e Conformação de Metais

Vol. 56, num. 56 (2019) — Evento parte do ABM WEEK 5ª edição - 2019

Event Logo

Temas

- Laminação de Tiras a Quente Convencional
- Laminação Steckel
- Laminação de Produtos Longos, incluindo Tubos
- Modelamento Matemático e Simulação
- Produtos Planos, incluindo Produtos Revestidos: desenvolvimento, propriedades e aplicação
- Processos de Tratamento Termomecânico (TMCP)

26 artigos

Laminação de Tiras a Quente Convencional

MODIFICATIONS IN THE USIMINAS’S SLAB REHEATING FURNACE TO ENABLE OPERATING WITH NATURAL GAS

MODIFICATIONS IN THE USIMINAS’S SLAB REHEATING FURNACE TO ENABLE OPERATING WITH NATURAL GAS

MARCONATO, EDUARDO AMADO ; SILVA, MARCOS ROBERTO SOARES DA ; PEREIRA, MARCELO MAGALHÃES

DOI: 10.5151/2594-5297-32209 p-1-5
ANALYSIS FRONT-END CURVATURE IN THE HOT FINIISH ROLLING PROCESS

ANALYSIS FRONT-END CURVATURE IN THE HOT FINIISH ROLLING PROCESS

DADOMI, EDMILSON FERNANDES ; LEONARDO CAMILO DOS REIS ; PAULO, CLAUDIO SILVA DE

DOI: 10.5151/2594-5297-32218 p-6-15
INCREASE HOT CHARGE - AUTOMATION REALOCATION SLABS

INCREASE HOT CHARGE - AUTOMATION REALOCATION SLABS

ASSUNÇÃO, JOSÉ FABIANO MARTINS ; COUTINHO, NAYARA ; FAGUNDES, JOSÉ ; PERUCH, LEONARDO ARAÚJO ; COSTA, MARCO TÚLIO ; PINTO, HENRIQUE CARNEIRO

DOI: 10.5151/2594-5297-32307 p-44-50
WEEKLY PLANNING - HOT STRIP MILL AM TUBARAO

WEEKLY PLANNING - HOT STRIP MILL AM TUBARAO

COUTINHO, NAYARA NEVES ; FRANCISQUETO, JOVANIR ; COSTA, MARCO TÚLIO ; FAGUNDES, JOSÉ

DOI: 10.5151/2594-5297-32393 p-112-117
FAILURE ANALYSIS OF A STAINLESS STEEL STRIP ACCUMULATOR OF AN ANNEALING AND PICKLING LINE.

FAILURE ANALYSIS OF A STAINLESS STEEL STRIP ACCUMULATOR OF AN ANNEALING AND PICKLING LINE.

ATAÍDE, ANTONIO CARLOS ; CAMISAO, LUCIO RIBEIRO ; ALAN PEREIRA ; RIBEIRO, ANDRELIO MARCOS ; CAMPOS, RENATO SIQUEIRA

DOI: 10.5151/2594-5297-32412 p-126-132
COST REDUCTION AND BETTER QUALITY CONTROL BY ON-LINE ROUGHNESS MEASUREMENT DURING CONTINUOUS STRIP PROCESSING - SORM3PLUS

COST REDUCTION AND BETTER QUALITY CONTROL BY ON-LINE ROUGHNESS MEASUREMENT DURING CONTINUOUS STRIP PROCESSING - SORM3PLUS

PEREIRA, ANDERSON

DOI: 10.5151/2594-5297-32418 p-133-140
RELIABILITY STUDY OF COLD MILL MOTORS AT ARCELORMITTAL VEGA

RELIABILITY STUDY OF COLD MILL MOTORS AT ARCELORMITTAL VEGA

CRISTOFARI, CARLOS ALBERTO ; THULER, ELIEZER ; NETO, ERNESTO FURTADO DE MELLO ; NUNES, CLAUDIO VANO

DOI: 10.5151/2594-5297-32444 p-141-150
IMPROVEMENT IN ROLLED IN SCALE INDEX ON HIGH PRODUCTIVE MILLS

IMPROVEMENT IN ROLLED IN SCALE INDEX ON HIGH PRODUCTIVE MILLS

REGO, CLEUDSON DOS SANTOS ; SALLES, ARNALDO CARNEIRO ; JULIANO BRAZ POSSATTI ; MENDES, LEANDRO DE LUCAS

DOI: 10.5151/2594-5297-32461 p-151-158
REDUCTION OF ROLL CONSUMPTION IN HOT STRIP MILL AT ARCELORMITTAL TUBARAO

REDUCTION OF ROLL CONSUMPTION IN HOT STRIP MILL AT ARCELORMITTAL TUBARAO

PIN, VINICIUS ANTONIO RAMOS ; JESUS, LUCIANO PASSOS DE ; BELTRAME, VAGNO DORDENONI ; JUNIOR, PAULO RODRIGUES DOS SANTOS

DOI: 10.5151/2594-5297-32485 p-167-170
METALLOGRAPHIC TECHNIQUES PROCEDURES FOR THE INTERMETALLIC LAYER MORPHOLOGY CHARACTERIZATION IN HOT DIP GALVANIZED STEELS – GI

METALLOGRAPHIC TECHNIQUES PROCEDURES FOR THE INTERMETALLIC LAYER MORPHOLOGY CHARACTERIZATION IN HOT DIP GALVANIZED STEELS – GI

NETO, BRUNO KNEIPEL ; CERQUEIRA, FABRICIO ; CORREIA, MYLENA INAIÊ ; FILHO, JOSÉ FRANCISCO DA SILVA

DOI: 10.5151/2594-5297-32493 p-171-177
STUDY OF WELDABILITY OF HIGH STRENGTH LOW ALLOY STEELS WITH BORON AT LASER WELDING

STUDY OF WELDABILITY OF HIGH STRENGTH LOW ALLOY STEELS WITH BORON AT LASER WELDING

LELIS, JEFFERSON LISBOA ; GOUVEIA, MAIARA RODRIGUES ; SILVA, MARCOS ROBERTO SOARES DA

DOI: 10.5151/2594-5297-32515 p-194-201
DANIELI COLD PROCESSING TECHNOLOGY: INNOVATIVE APPROACHES FOR NEW LINES AND UPGRADES

DANIELI COLD PROCESSING TECHNOLOGY: INNOVATIVE APPROACHES FOR NEW LINES AND UPGRADES

HOLZ, RUEDIGER ; VIGNOLO, LUCIANO ; SETTIMO, TOMMASO

DOI: 10.5151/2594-5297-33184 p-202-213

Laminação Steckel

OPTIMIZATION OF THE COOLING TIME OF THE WORK ROLLS IN THE ROLL SHOP

OPTIMIZATION OF THE COOLING TIME OF THE WORK ROLLS IN THE ROLL SHOP

DIAS, ISMAEL DE SOUZA ; ALINE ARAÚJO ; PACHECO, FÁBIO HENRIQUE ; NOVELLI, LUCIANO ALVES ; JUNIOR, WILLY SCHUWARTEN

DOI: 10.5151/2594-5297-32322 p-62-67
OPTIMIZATION OF THE STORAGE PROCESS OF STEEL COILS APPLIED TO THE STORAGE YARD OF HOT STRIP MILL

OPTIMIZATION OF THE STORAGE PROCESS OF STEEL COILS APPLIED TO THE STORAGE YARD OF HOT STRIP MILL

MENDES, WALDENIR DA SILVA ; NOVELLI, LUCIANO ALVES ; JUNIOR, WILLY SCHUWARTEN ; SAIÃO, JOYCE ALEXSANDRA OLIVEIRA S.

DOI: 10.5151/2594-5297-32364 p-76-82

Laminação de Produtos Longos, incluindo Tubos

SRM – EXTERNAL MARKS ON TUBES SURFACE

SRM – EXTERNAL MARKS ON TUBES SURFACE

DINIZ, IVAN CÉSAR LOPES

DOI: 10.5151/2594-5297-32355 p-68-75
MANDREL BAR'S RECOVERY OF PROPERTIES BY QUENCHING AND TEMPERING PROCESS

MANDREL BAR'S RECOVERY OF PROPERTIES BY QUENCHING AND TEMPERING PROCESS

JÚNIOR, CÉSAR ROMERO AFONSO GOULART ; DINIZ, IVAN CÉSAR LOPES

DOI: 10.5151/2594-5297-32371 p-83-90

Modelamento Matemático e Simulação

APPLICATION OF AN EMPIRICAL MODEL FOR ROLLING FORCE CALCULATION IN THE HOT STRIP FINISHING MILL

APPLICATION OF AN EMPIRICAL MODEL FOR ROLLING FORCE CALCULATION IN THE HOT STRIP FINISHING MILL

SANTOS, ANTONIO ADEL DOS ; BARBOSA, JÔNATAS VENÂNCIO

DOI: 10.5151/2594-5297-32223 p-16-26
EVALUATION OF THE DYNAMIC BEHAVIOR OF GEARBOX STAND MILL LF 02 PASS 1 BEFORE PROCESS VARIABLES

EVALUATION OF THE DYNAMIC BEHAVIOR OF GEARBOX STAND MILL LF 02 PASS 1 BEFORE PROCESS VARIABLES

PICOLI, EVERTON ; CASTRO, RENATO NASCIMENTO DE ; MORETTI, RAMON AUGUSTO ; FUJIMOTO, RODRIGO YOSHIAKI ; SANTOS, EDMILSON RICARDO DE OLIVEIRA ; CARLETTI, GABRIEL OLIVEIRA NASCIMENTO ; SEVERINO, HENRIQUE DA ROCHA

DOI: 10.5151/2594-5297-32387 p-91-101
PREDICTION OF THE UNIAXIAL TENSILE PLASTIC BEHAVIOR OF A DEEP-DRAWING QUALITY STEEL USING DIFFERENT WORK-HARDENING EQUATIONS

PREDICTION OF THE UNIAXIAL TENSILE PLASTIC BEHAVIOR OF A DEEP-DRAWING QUALITY STEEL USING DIFFERENT WORK-HARDENING EQUATIONS

GONORING, TIAGO BRISTT ; FERREIRA, JETSON LEMOS ; MOREIRA, LUCIANO PESSANHA ; SOUZA, MARDEN VALENTE DE ; ORLANDO, MARCOS TADEU D’AZEREDO

DOI: 10.5151/2594-5297-32391 p-102-111
FIELD TESTING AND NUMERICAL SIMULATION APPLIED TO DYNAMIC PROBLEMS

FIELD TESTING AND NUMERICAL SIMULATION APPLIED TO DYNAMIC PROBLEMS

PEREIRA, MARCELO G. ; SANTOS, EDMILSON R. O. ; SILVA, DANILO A. ; CASTRO, RENATO ; SEVERINO, HENRIQUE R. ; SOUSA, FERNANDO C.

DOI: 10.5151/2594-5297-32494 p-178-186
COMPUTATIONAL THERMODYNAMICS AS A TOOL TO UNDERSTANDING AND DESIGNING INTERCRITICAL HEAT TREATMENT OF STEELS

COMPUTATIONAL THERMODYNAMICS AS A TOOL TO UNDERSTANDING AND DESIGNING INTERCRITICAL HEAT TREATMENT OF STEELS

COSTA E SILVA ANDRE ; FRANCISCO COTRIM ; TOLOMELLI, FLÁVIA TEREZA DOS SANTOS FERNANDES

DOI: 10.5151/2594-5297-32496 p-187-193

Produtos Planos, incluindo Produtos Revestidos: desenvolvimento, propriedades e aplicação

Processos de Tratamento Termomecânico (TMCP)

INFLUENCE OF ACCELERATED COOLING CONDITIONS ON MICROSTRUCTURE AND FLATNESS OF API STEEL HEAVY PLATES

INFLUENCE OF ACCELERATED COOLING CONDITIONS ON MICROSTRUCTURE AND FLATNESS OF API STEEL HEAVY PLATES

PAIVA, FABRICIO MAZOLA DA SILVA ; GANDRA, CARMOS ANTONIO ; BUONO, VICENTE TADEU LOPES ; SANTOS, ANTONIO ADEL DOS

DOI: 10.5151/2594-5297-32315 p-51-61
EFFECT OF GRAIN SIZE ON THE DRAWABILITY OF THE NIOBIUM-STABILIZED FERRITIC STAINLESS STEEL ASTM 430

EFFECT OF GRAIN SIZE ON THE DRAWABILITY OF THE NIOBIUM-STABILIZED FERRITIC STAINLESS STEEL ASTM 430

MOURA, CAIO CÉSAR CALDEIRA ; OLIVEIRA, TARCÍSIO REIS DE ; BARBOSA, REGINALDO PINTO

DOI: 10.5151/2594-5297-32471 p-159-166