Anais do Seminário de Laminação e Conformação

ISSN 2594-5297

56° Seminário de Laminação e Conformação de Metais

vol. 56, num.56 (2019)

Download dos artigos

Baixar artigos

Temas

Laminação de Tiras a Quente Convencional

Laminação de Tiras a Frio, Recozimento e Processos de Revestimento

Laminação Steckel

Laminação de Produtos Longos, incluindo Tubos

Modelamento Matemático e Simulação

Produtos Planos, incluindo Produtos Revestidos: desenvolvimento, propriedades e aplicação

Processos de Tratamento Termomecânico (TMCP)

Laminação de Tiras a Quente Convencional

MODIFICATIONS IN THE USIMINAS’S SLAB REHEATING FURNACE TO ENABLE OPERATING WITH NATURAL GAS

MODIFICATIONS IN THE USIMINAS’S SLAB REHEATING FURNACE TO ENABLE OPERATING WITH NATURAL GAS

Marconato, Eduardo Amado; Silva, Marcos Roberto Soares da; Pereira, Marcelo Magalhães;

ARTIGO – doi 10.5151/2594-5297-32209

p-1-5
ANALYSIS FRONT-END CURVATURE IN THE HOT FINIISH ROLLING PROCESS

ANALYSIS FRONT-END CURVATURE IN THE HOT FINIISH ROLLING PROCESS

Reis, Leonardo Camilo dos; Paulo, Claudio Silva de; Dadomi, Edmilson Fernandes;

ARTIGO – doi 10.5151/2594-5297-32218

p-6-15
INCREASE HOT CHARGE - AUTOMATION REALOCATION SLABS

INCREASE HOT CHARGE - AUTOMATION REALOCATION SLABS

Assunção, José Fabiano Martins; Coutinho, Nayara; Fagundes, José; Pinto, Henrique Carneiro; Peruch, Leonardo Araújo; Costa, Marco Túlio;

ARTIGO – doi 10.5151/2594-5297-32307

p-44-50
WEEKLY PLANNING - HOT STRIP MILL AM TUBARAO

WEEKLY PLANNING - HOT STRIP MILL AM TUBARAO

Coutinho, Nayara Neves; Francisqueto, Jovanir; Costa, Marco Túlio; Fagundes, José;

ARTIGO – doi 10.5151/2594-5297-32393

p-112-117
FAILURE ANALYSIS OF A STAINLESS STEEL STRIP ACCUMULATOR OF AN ANNEALING AND PICKLING LINE.

FAILURE ANALYSIS OF A STAINLESS STEEL STRIP ACCUMULATOR OF AN ANNEALING AND PICKLING LINE.

Pereira, Alan de Sousa; Ataíde, Antonio Carlos; Ribeiro, Andrelio Marcos; Camisao, Lucio Ribeiro; Campos, Renato Siqueira;

ARTIGO – doi 10.5151/2594-5297-32412

p-126-132
COST REDUCTION AND BETTER QUALITY CONTROL BY ON-LINE ROUGHNESS MEASUREMENT DURING CONTINUOUS STRIP PROCESSING - SORM3PLUS

COST REDUCTION AND BETTER QUALITY CONTROL BY ON-LINE ROUGHNESS MEASUREMENT DURING CONTINUOUS STRIP PROCESSING - SORM3PLUS

Pereira, Anderson;

ARTIGO – doi 10.5151/2594-5297-32418

p-133-140
RELIABILITY STUDY OF COLD MILL MOTORS AT ARCELORMITTAL VEGA

RELIABILITY STUDY OF COLD MILL MOTORS AT ARCELORMITTAL VEGA

Cristofari, Carlos Alberto; Thuler, Eliezer; Neto, Ernesto Furtado de Mello; Nunes, Claudio Vano;

ARTIGO – doi 10.5151/2594-5297-32444

p-141-150
IMPROVEMENT IN ROLLED IN SCALE INDEX ON HIGH PRODUCTIVE MILLS

IMPROVEMENT IN ROLLED IN SCALE INDEX ON HIGH PRODUCTIVE MILLS

Possatti, Juliano Braz; Rego, Cleudson dos Santos; Salles, Arnaldo Carneiro; Mendes, Leandro de Lucas;

ARTIGO – doi 10.5151/2594-5297-32461

p-151-158
REDUCTION OF ROLL CONSUMPTION IN HOT STRIP MILL AT ARCELORMITTAL TUBARAO

REDUCTION OF ROLL CONSUMPTION IN HOT STRIP MILL AT ARCELORMITTAL TUBARAO

Pin, Vinicius Antonio Ramos; Junior, Paulo Rodrigues dos Santos; Jesus, Luciano Passos de; Beltrame, Vagno Dordenoni;

ARTIGO – doi 10.5151/2594-5297-32485

p-167-170
METALLOGRAPHIC TECHNIQUES PROCEDURES FOR THE INTERMETALLIC LAYER MORPHOLOGY CHARACTERIZATION IN HOT DIP GALVANIZED STEELS – GI

METALLOGRAPHIC TECHNIQUES PROCEDURES FOR THE INTERMETALLIC LAYER MORPHOLOGY CHARACTERIZATION IN HOT DIP GALVANIZED STEELS – GI

Neto, Bruno Kneipel; Cerqueira, Fabricio; Filho, José Francisco da Silva; Correia, Mylena Inaiê;

ARTIGO – doi 10.5151/2594-5297-32493

p-171-177
STUDY OF WELDABILITY OF HIGH STRENGTH LOW ALLOY STEELS WITH BORON AT LASER WELDING

STUDY OF WELDABILITY OF HIGH STRENGTH LOW ALLOY STEELS WITH BORON AT LASER WELDING

Lelis, Jefferson Lisboa; Gouveia, Maiara Rodrigues; Silva, Marcos Roberto Soares da;

ARTIGO – doi 10.5151/2594-5297-32515

p-194-201
DANIELI COLD PROCESSING TECHNOLOGY: INNOVATIVE APPROACHES FOR NEW LINES AND UPGRADES

DANIELI COLD PROCESSING TECHNOLOGY: INNOVATIVE APPROACHES FOR NEW LINES AND UPGRADES

Holz, Ruediger; Settimo, Tommaso; Vignolo, Luciano;

ARTIGO – doi 10.5151/2594-5297-33184

p-202-213

Laminação de Tiras a Frio, Recozimento e Processos de Revestimento

Laminação Steckel

OPTIMIZATION OF THE COOLING TIME OF THE WORK ROLLS IN THE ROLL SHOP

OPTIMIZATION OF THE COOLING TIME OF THE WORK ROLLS IN THE ROLL SHOP

Araújo, Aline de Cássia; Pacheco, Fábio Henrique; Dias, Ismael de Souza; Novelli, Luciano Alves; Junior, Willy Schuwarten;

ARTIGO – doi 10.5151/2594-5297-32322

p-62-67
OPTIMIZATION OF THE STORAGE PROCESS OF STEEL COILS APPLIED TO THE STORAGE YARD OF HOT STRIP MILL

OPTIMIZATION OF THE STORAGE PROCESS OF STEEL COILS APPLIED TO THE STORAGE YARD OF HOT STRIP MILL

Saião, Joyce Alexsandra Oliveira S.; Mendes, Waldenir da Silva; Novelli, Luciano Alves; Junior, Willy Schuwarten;

ARTIGO – doi 10.5151/2594-5297-32364

p-76-82

Laminação de Produtos Longos, incluindo Tubos

SRM – EXTERNAL MARKS ON TUBES SURFACE

SRM – EXTERNAL MARKS ON TUBES SURFACE

Diniz, Ivan César Lopes;

ARTIGO – doi 10.5151/2594-5297-32355

p-68-75
MANDREL BAR'S RECOVERY OF PROPERTIES BY QUENCHING AND TEMPERING PROCESS

MANDREL BAR'S RECOVERY OF PROPERTIES BY QUENCHING AND TEMPERING PROCESS

Diniz, Ivan César Lopes; Júnior, César Romero Afonso Goulart;

ARTIGO – doi 10.5151/2594-5297-32371

p-83-90

Modelamento Matemático e Simulação

APPLICATION OF AN EMPIRICAL MODEL FOR ROLLING FORCE CALCULATION IN THE HOT STRIP FINISHING MILL

APPLICATION OF AN EMPIRICAL MODEL FOR ROLLING FORCE CALCULATION IN THE HOT STRIP FINISHING MILL

Santos, Antonio Adel dos; Barbosa, Jônatas Venâncio;

ARTIGO – doi 10.5151/2594-5297-32223

p-16-26
EVALUATION OF THE DYNAMIC BEHAVIOR OF GEARBOX STAND MILL LF 02 PASS 1 BEFORE PROCESS VARIABLES

EVALUATION OF THE DYNAMIC BEHAVIOR OF GEARBOX STAND MILL LF 02 PASS 1 BEFORE PROCESS VARIABLES

Picoli, Everton; Severino, Henrique da Rocha; Castro, Renato Nascimento de; Moretti, Ramon Augusto; Carletti, Gabriel Oliveira Nascimento; Fujimoto, Rodrigo Yoshiaki; Santos, Edmilson Ricardo de Oliveira;

ARTIGO – doi 10.5151/2594-5297-32387

p-91-101
PREDICTION OF THE UNIAXIAL TENSILE PLASTIC BEHAVIOR OF A DEEP-DRAWING QUALITY STEEL USING DIFFERENT WORK-HARDENING EQUATIONS

PREDICTION OF THE UNIAXIAL TENSILE PLASTIC BEHAVIOR OF A DEEP-DRAWING QUALITY STEEL USING DIFFERENT WORK-HARDENING EQUATIONS

Gonoring, Tiago Bristt; Orlando, Marcos Tadeu D’Azeredo; Ferreira, Jetson Lemos; Souza, Marden Valente de; Moreira, Luciano Pessanha;

ARTIGO – doi 10.5151/2594-5297-32391

p-102-111
FIELD TESTING AND NUMERICAL SIMULATION APPLIED TO DYNAMIC PROBLEMS

FIELD TESTING AND NUMERICAL SIMULATION APPLIED TO DYNAMIC PROBLEMS

Pereira, Marcelo G.; Santos, Edmilson R. O.; Silva, Danilo A.; Castro, Renato; Severino, Henrique R.; Sousa, Fernando C.;

ARTIGO – doi 10.5151/2594-5297-32494

p-178-186
COMPUTATIONAL THERMODYNAMICS AS A TOOL TO UNDERSTANDING AND DESIGNING INTERCRITICAL HEAT TREATMENT OF STEELS

COMPUTATIONAL THERMODYNAMICS AS A TOOL TO UNDERSTANDING AND DESIGNING INTERCRITICAL HEAT TREATMENT OF STEELS

Cotrim, Francisco de Assis Diniz; Tolomelli, Flávia Tereza dos Santos Fernandes; Silva, André Luiz V. da Costa e;

ARTIGO – doi 10.5151/2594-5297-32496

p-187-193

Produtos Planos, incluindo Produtos Revestidos: desenvolvimento, propriedades e aplicação

EFFECT OF HEATING TEMPERATURE ON FE-AL-SI DIFUSION IN AL-SI COATING DURING THE AUSTENITIZATION STAGE IN A HOT STAMPING PROCESS

EFFECT OF HEATING TEMPERATURE ON FE-AL-SI DIFUSION IN AL-SI COATING DURING THE AUSTENITIZATION STAGE IN A HOT STAMPING PROCESS

Cerqueira, F. M.; Oliveira, C. A. S.; Neto, B. K.; Martins, L. P. R.;

ARTIGO – doi 10.5151/2594-5297-32264

p-27-34
INFLUENCE OF THE PROCESS PARAMETERS OF INTERCRITICAL ANNEALING IN THE PRODUCTION OF STEELS FOR HOT STAMPING

INFLUENCE OF THE PROCESS PARAMETERS OF INTERCRITICAL ANNEALING IN THE PRODUCTION OF STEELS FOR HOT STAMPING

Cerqueira, F. M.; Oliveira, C. A. S.; Neto, B. K.; Martins, L. P. R.;

ARTIGO – doi 10.5151/2594-5297-32287

p-35-43
IMPACTO DA PREPARAÇÃO METALOGRÁFICA NA QUANTIFICAÇÃO DE AUSTENITA RETIDA DE AÇO AHSS EM ANÁLISE VIA EBSD

THE IMPACT OF METALLOGRAPHIC SAMPLE PREPARATION ON THE RETAINED AUSTENITE QUANTIFICATION BY MEANS OF EBSD IN AHSS STEEL

Julião, Rodrigo Bessa; Costa, Vanucci de Medeiros; Ferreira, Jetson Lemos; Rodrigues, Flávio José Saraiva; Cerqueira, Fabrício Moreira; Brites, Joelma Krugel; Castro, Nicolau Apoena;

ARTIGO – doi 10.5151/2594-5297-32403

p-118-125

Processos de Tratamento Termomecânico (TMCP)

INFLUENCE OF ACCELERATED COOLING CONDITIONS ON MICROSTRUCTURE AND FLATNESS OF API STEEL HEAVY PLATES

INFLUENCE OF ACCELERATED COOLING CONDITIONS ON MICROSTRUCTURE AND FLATNESS OF API STEEL HEAVY PLATES

Paiva, Fabricio Mazola da Silva; Santos, Antonio Adel dos; Buono, Vicente Tadeu Lopes; Gandra, Carmos Antonio;

ARTIGO – doi 10.5151/2594-5297-32315

p-51-61
EFFECT OF GRAIN SIZE ON THE DRAWABILITY OF THE NIOBIUM-STABILIZED FERRITIC STAINLESS STEEL ASTM 430

EFFECT OF GRAIN SIZE ON THE DRAWABILITY OF THE NIOBIUM-STABILIZED FERRITIC STAINLESS STEEL ASTM 430

Moura, Caio César Caldeira; Barbosa, Reginaldo Pinto; Oliveira, Tarcísio Reis de;

ARTIGO – doi 10.5151/2594-5297-32471

p-159-166