Proceedings of the Seminar on Rolling, Metal Forming and Products

ISSN 2594-5297

58º Seminário de Laminação, Conformação de Metais e Produtos

vol. 58, num.58 (2023)

Download all articles

Download all articles

heading.theme

58th Seminar on Rolling, Metal Forming and Products
- Desenvolvimento de produtos de aço e não-ferrosos
- Equipamentos e cilindros
- Estampagem, Trefilação, Extrusão e Forjamento de aços e não-ferrosos
- Inovações tecnológicas e outros processos de conformação
- Laminação de chapas grossas
- Laminação de longos
- Laminação de não-ferrosos
- Laminação de placa fina
- Laminação de tiras a frio e processos de revestimento
- Laminação de tiras a quente
- Laminação steckel

58TH SEMINAR ON ROLLING, METAL FORMING AND PRODUCTS

Desenvolvimento de produtos de aço e não-ferrosos

EXPANDED PLATES: STAINLESS STEEL IS THE SOLUTION AGAINST CORROSION AND ABRASION

CHAPAS EXPANDIDAS: INOX é A SOLUçãO CONTRA CORROSãO E ABRASãO

Alvarenga, Genesis de Assis;

Article – doi 10.5151/2594-5297-39798 p-1-12
NON-METALLIC INCLUSIONS IN STEEL: USE OF SPARK-DAT RESULTS FROM THE STEEL WORKSHOP TO PREDICT THE STANDARDS DIN 50602 (OPTICAL MICROSCOPE) IN COILS SAMPLES

INCLUSÕES NÃO METÁLICAS EM AÇO: USO DE SPARK-DAT RESULTADOS DA OFICINA DE AÇO PARA PREDIZER OS PADRÕES DIN 50602 (MICROSCÓPIO ÓPTICO) EM AMOSTRAS DE BOBINAS

Pedrini, Rinaldo Henrique; Jesus, Henrique Severiano de; Ferreira, Fernando Generoso Neiva; Passigatti, Sirlene Trugilho Perin; Ney, Vitor Bogaci; Viera, Estefano Aparecido;

Article – doi 10.5151/2594-5297-40272 p-13-26
MICROSIM - PHASE TRANSFORMATION: AN AUSTENITE TRANSFORMATION MODEL FOR LOW ALLOY STEELS

MICROSIM-PHASE TRANSFORMATION: UM MODELO DA TRANSFORMAÇÃO DA AUSTENITA PARA AÇOS DE BAIXA LIGA

Gorni, Antonio Augusto;

Article – doi 10.5151/2594-5297-40368 p-27-38

Equipamentos e cilindros

REDUCTION OF THE SKIN ROLLING LOAD IN THE STRAIN HARDENING OF SAE 1010 STEEL DUE TO THE CROWNING OF THE WORK ROLLS

REDUçãO DA CARGA DE LAMINAçãO DE ENCRUAMENTO NO ENCRUAMENTO DO AçO SAE 1010 ATRAVéS DO COROAMENTO DOS CILINDROS DE TRABALHO

Pereira, Rafael Aparecido;

Article – doi 10.5151/2594-5297-39343 p-39-52
INTEGRATED ROLL QUALITY SYSTEMS FOR EXISTING ROLL GRINDING MACHINES - DIGITALIZATION OF ROLL SHOPS - IOT APPLICATIONS AND AUTOMATION

INTEGRATED ROLL QUALITY SYSTEMS FOR EXISTING ROLL GRINDING MACHINES - DIGITALIZATION OF ROLL SHOPS - IOT APPLICATIONS AND AUTOMATION

Zerenko, Thomas;

Article – doi 10.5151/2594-5297-39414 p-53-64
DEVELOPMENT OF A GRINDING WHEEL FOR ROLL GRINDING IN A FLAT STEEL ROLLING MILL AT GERDAU

DEVELOPMENT OF A GRINDING WHEEL FOR ROLL GRINDING IN A FLAT STEEL ROLLING MILL AT GERDAU

Nascimento, Danilo Deon do;

Article – doi 10.5151/2594-5297-39490 p-65-78
DEVELOPMENT HSS ROLLS FOR LAST STAND IN HOT STRIP MILLS

DESENVOLVIMENTO DE CILINDROS HSS PARA AS ULTIMAS CADEIRAS DE TREM ACABADOR DE LAMINAçãO DE TIRAS A QUENTE

Pin, Vinicius Antonio Ramos;

Article – doi 10.5151/2594-5297-40349 p-79-92
USAGE FEASIBILITY OF THE FF280DP STEEL IN AUTOMOTIVE OUTER PANEL IN COMPARISON WITH BH220 STEEL

VIABILIDADE DE UTILIZAÇÃO DO AÇO FF280DP EM PAINEL EXTERNO AUTOMOTIVO EM COMPARAÇÃO COM O AÇO BH220

Ferreira, Jetson Lemos; Tepedino, José Osvaldo Amaral; Souza, Marden Valente de; Rodriguez, Jade Oliveira Palevicius; Nascimento, Ana Biatriz Guedes do; Ferreira, Rafael Fagundes; Otoni Júnior, Fábio Cunha; Santana, Adelson Carneiro de;

Artigo – doi 10.5151/2594-5297-40046 p-93-101

Estampagem, Trefilação, Extrusão e Forjamento de aços e não-ferrosos

EVALUATION OF THE INFLUENCE OF STOCK RECOVERY CONDITIONS ON THE ELASTIC PROPERTIES OF CA60 STEEL USING ARTIFICIAL INTELLIGENCE

AVALIAÇÃO DA INFLUÊNCIA DAS CONDIÇÕES DE RECUPERAÇÃO EM ESTOQUE NAS PROPRIEDADES ELÁSTICAS DO AÇO CA60 UTILIZANDO INTELIGÊNCIA ARTIFICIAL

Barbosa, Gilson Vasconcelos;

Article – doi 10.5151/2594-5297-39473 p-102-112
22MNB5 PERFORMANCE AS SURFACE PROTECTION MASK UNDER HARSH FORGING CONDITIONS AND ITS WEAR INSIGHT

22MNB5 PERFORMANCE AS SURFACE PROTECTION MASK UNDER HARSH FORGING CONDITIONS AND ITS WEAR INSIGHT

Rosiak, André; Schaeffer, Lirio; Costa, Luana De Lucca de; Brito, Alberto Moreira Guerreiro;

Article – doi 10.5151/2594-5297-39791 p-113-119
DEVELOPMENT OF AN EXPERIMENTAL BENCH FOR CRYOGENIC PUNCHING OF AHSS SHEETS

DEVELOPMENT OF AN EXPERIMENTAL BENCH FOR CRYOGENIC PUNCHING OF AHSS SHEETS

Gonçalves, Rennáh Francisco Figueiredo; Rodrigues, Flavio José Saraiva; Ferreira, Jetson Lemos; Oliveira, Adilson José de; Melo, Anderson Clayton Alves de; Sousa, Fábio José Pinheiro; Castro, Nicolau Apoena;

Article – doi 10.5151/2594-5297-40291 p-120-133
QUALITATIVE ANALYSIS OF CUT EDGES IN DP780 STEEL TESTED AT ROOM AND CRYOGENIC TEMPERATURES

QUALITATIVE ANALYSIS OF CUT EDGES IN DP780 STEEL TESTED AT ROOM AND CRYOGENIC TEMPERATURES

Barbosa, Henrique Tomé; Gonçalves, Rennáh Francisco Figueiredo; Rodrigues., Flavio José Saraiva; Ferreira, Jetson Lemos; Oliveira, Adilson José de; Melo, Anderson Clayton Alves de; Sousa, Fábio José Pinheiro; Castro, Nicolau Apoena;

Article – doi 10.5151/2594-5297-40304 p-134-147
QUANTITATIVE METALLOGRAPHIC ANALYSIS OF THE EFFECT OF MECHANICAL DEFORMATION IN TRIP STEELS

QUANTITATIVE METALLOGRAPHIC ANALYSIS OF THE EFFECT OF MECHANICAL DEFORMATION IN TRIP STEELS

Santos, Ana Luiza Dos; Farias, Willian Alber da Silva; Ferreira, Jetson Lemos; Rodrigues, Flavio José Saraiva; Castro, Nicolau Apoena; Souza, Marden Valente de;

Article – doi 10.5151/2594-5297-40364 p-148-161
EFFECTS OF CUTTING ASPECTS ON FLANGEABILITY OF HR FB580 GI STEEL*

EFFECTS OF CUTTING ASPECTS ON FLANGEABILITY OF HR FB580 GI STEEL*

Farias, Willian Alber da Silva; Santos, Ana Luiza Dos; Ferreira, Jetson Lemos; Rodrigues, Flavio José Saraiva; Castro, Nicolau Apoena; Souza, Marden Valente de;

Article – doi 10.5151/2594-5297-40365 p-162-175
DETERMINATION METHODOLOGY OF STRESS-STRAIN CURVE FOR DIFFERENT HARDENING MODELS AND INSTANTANEOUS STRAIN HARDENING EXPONENT VIA PYTHON

DETERMINATION METHODOLOGY OF STRESS-STRAIN CURVE FOR DIFFERENT HARDENING MODELS AND INSTANTANEOUS STRAIN HARDENING EXPONENT VIA PYTHON

Ferreira, Jetson Lemos; Pereira Neto Durval; Souza Marden Valente; Souza Roan Sampaio; Gonoring Tiago Britts;

Artigo – doi 10.5151/2594-5297-40003 p-176-185

Inovações tecnológicas e outros processos de conformação

IMPROVEMENT ON PIERCING PLUG LIFETIME THROUGH ENHANCED COOLING AT VALLOUREC JECEABA’S PIERCING

AUMENTO DA VIDA úTIL DAS PONTAS DE PERFURAçãO ATRAVéS DA MELHORIA DO RESFRIAMENTO DE PONTAS NO LAMINADOR PERFURADOR DA VALLOUREC JECEABA

Ferraz, Pedro Picorelli; Elias, Roberto Wagner de Oliveira; Vay, Leonardo Ferreira; Silva, Felipe Ferreira;

Article – doi 10.5151/2594-5297-39583 p-186-195
COIL QUALITY PREDICTION BASED ON STEELMAKING SHOP VARIABLES USING MACHINE LEARNING

COIL QUALITY PREDICTION BASED ON STEELMAKING SHOP VARIABLES USING MACHINE LEARNING

Alves, Estelita Simoes Ribeiro; Ney, Vitor Bogaci; Soares, Danilo Nunes;

Article – doi 10.5151/2594-5297-39639 p-196-201
IMPROVEMENT OF BOTH MECHANICAL PROPERTIES AND METALLURGICAL MICROSTRUCTURE OF WIRE ROD COLD HEADING STEEL BY APPLYING THERMO-MECHANICAL ROLLING

IMPROVEMENT OF BOTH MECHANICAL PROPERTIES AND METALLURGICAL MICROSTRUCTURE OF WIRE ROD COLD HEADING STEEL BY APPLYING THERMO-MECHANICAL ROLLING

Cimolino, Maicol; Spadaccini, Andrea; Marzio, Sara;

Article – doi 10.5151/2594-5297-39723 p-202-213
MI.DA®—EXPERIENCE IN CASTING AND ROLLING AN OCTAGONAL SECTION

MI.DA®—EXPERIENCE IN CASTING AND ROLLING AN OCTAGONAL SECTION

Luca, Andrea de; Laura, Nicolo' de;

Article – doi 10.5151/2594-5297-39726 p-214-227
INVESTIGATION OF THE CROSS WEDGE ROLLING PROCESS

INVESTIGATION OF THE CROSS WEDGE ROLLING PROCESS

Rosiak, André; Santos, Thomas Gomes dos; Cabral, Felipe Barbosa; Schaeffer, Lírio;

Article – doi 10.5151/2594-5297-39836 p-228-241
EARLY DETECTION OF INTERNAL INCLUSIONS AND SHELL DEFECTS USING MAGNETIC FLUX LEAKAGE

EARLY DETECTION OF INTERNAL INCLUSIONS AND SHELL DEFECTS USING MAGNETIC FLUX LEAKAGE

Schwarzmann, Jakob;

Article – doi 10.5151/2594-5297-39876 p-242-254
MICROSIM BARS® AND PHASTRANSIM®: TOOLS FOR ALLOY OPTIMIZATION, FROM AUSTENITE TO FINAL ROOM TEMPERATURE MICROSTRUCTURE AND PROPERTIES FOR LOW-NIOBIUM STEELS

MICROSIM BARS® E PHASTRANSIM®: FERRAMENTAS PARA OTIMIZAÇÃO DE LIGAS, DA AUSTENITA ATÉ A TEMPERATURA FINAL AMBIENTE, MICROESTRUTURA E PROPRIEDADES PARA AÇOS DE BAIXO NIÓBIO

Oliveira, Alisson Paulo de;

Article – doi 10.5151/2594-5297-40018 p-255-268
HIGHEST STEEL SURFACE QUALITY AND PROCESS EFFICIENCY POWERED BY 2D & 3D INSPECTION OF SURFACE DEFECTS AND WAVINESS RECOGNITION

HIGHEST STEEL SURFACE QUALITY AND PROCESS EFFICIENCY POWERED BY 2D & 3D INSPECTION OF SURFACE DEFECTS AND WAVINESS RECOGNITION

Recker, Dominik; Bilichuc, Roberto;

Article – doi 10.5151/2594-5297-40387 p-269-282

Laminação de chapas grossas

EFFECT OF PARTIAL SUBSTITUTION OF MN BY NB MICROADDITIONS ON THE MECHANICAL PROPERTIES OF STRUCTURAL C-MN STEEL

EFFECT OF PARTIAL SUBSTITUTION OF MN BY NB MICROADDITIONS ON THE MECHANICAL PROPERTIES OF STRUCTURAL C-MN STEEL

Bahia, Jean Viana; Murari, Fabio Dian; Borba, Tadeu Messias Donizete;

Article – doi 10.5151/2594-5297-39505 p-283-295
API 5L X80 STEEL HEAVY PLATES PRODUCED BY THERMO-MECHANICAL PROCESS IN THE PLATE MILL AT GERDAU - EFFECTS OF THE ROLLING STRATEGY

LAMINAÇÃO TERMO-MECÂNICA VISANDO A OBTENÇÃO DE UM AÇO API 5L GRAU X80 NO LAMINADOR DE CHAPAS GROSSAS DA GERDAU - EFEITOS DAS ESTRATÉGIAS DE LAMINAÇÃO

Abreu, Luiz Gustavo de Oliveira;

Article – doi 10.5151/2594-5297-39722 p-296-308
TENOVA TRGD DOUBLE REGENERATIVE BURNERS FOR LOW CALORIFIC VALUE FUELS

TENOVA TRGD DOUBLE REGENERATIVE BURNERS FOR LOW CALORIFIC VALUE FUELS

Rocca, Alessandro Della; Senarega, Maurizio; Tomolillo, Marcello;

Article – doi 10.5151/2594-5297-39946 p-309-322
SURFACE TREATMENT OF SLABS USING FULLY AUTOMATIC INLINE INSPECTION SYSTEM

TRATAMENTO DE SUPERFÍCIE DE PLACAS USANDO SISTEMA DE INSPEÇÃO EM LINHA TOTALMENTE AUTOMÁTICO

Tavares, Samuel de Barros;

Article – doi 10.5151/2594-5297-40142 p-323-334

Laminação de longos

UPGRADING OF BAR MILLS BY RETROFITTING A HIGH-PERFORMANCE ABRASIVE CUT-OFF MACHINE

UPGRADING OF BAR MILLS BY RETROFITTING A HIGH-PERFORMANCE ABRASIVE CUT-OFF MACHINE

Asamer, Norbert;

Article – doi 10.5151/2594-5297-39420 p-335-346
ADVANCED SEAMLESS APPROACH FOR OXIDE SCALE GROWTH AND DESCALING PREDICTION IN STEELMAKING INDUSTRY

ADVANCED SEAMLESS APPROACH FOR OXIDE SCALE GROWTH AND DESCALING PREDICTION IN STEELMAKING INDUSTRY

El-Kosseifi, Nadine;

Article – doi 10.5151/2594-5297-39592 p-347-360
QUALITY FROM THE START: ABS QWR LAYOUT, EQUIPMENT, AND PROCESS SOLUTION

QUALITY FROM THE START: ABS QWR LAYOUT, EQUIPMENT, AND PROCESS SOLUTION

Cimolino, Maicol;

Article – doi 10.5151/2594-5297-39725 p-361-374
ENTANGLEMENT REDUCTION – ROLLING MILL AND WIRE DRAWING

REDUçãO DE EMBOLO EM FIO MáQUINA - LAMINAçãO A QUENTE E TREFILARIA

Ferreira, Izabelle Lannes Salgueiro;

Article – doi 10.5151/2594-5297-39733 p-375-388
AI-SUPPORTED MATERIAL SIMULATION OF FORMING PROCESSES

AI-SUPPORTED MATERIAL SIMULATION OF FORMING PROCESSES

Kruse, Michael; Wehage, Doris;

Article – doi 10.5151/2594-5297-39816 p-389-400
SIZING MILL ROLLING LINE – PIPES FOR MANUFACTURING CYLINDERS

FRISO EXTERNO – TUBOS SEM COSTURA PARA FABRICAÇÃO DE CILINDROS DE GÁS

Silva, Silvester Ferreira da;

Article – doi 10.5151/2594-5297-39929 p-401-414
GOTHIC AND UNIVERSAL PASSES CALCULATION

CáLCULO DE PASSE GóTICO E UNIVERSAL

Pereira, Jose Aparecido;

Article – doi 10.5151/2594-5297-39936 p-415-427
HYBRID HEATING- COMBINATION OF INDUCTION AND CONVENTIONAL FURNACES AS AN INTEMEDIATE STEP TOWARDS A CO2-FREE FUTURE

HYBRID HEATING- COMBINATION OF INDUCTION AND CONVENTIONAL FURNACES AS AN INTEMEDIATE STEP TOWARDS A CO2-FREE FUTURE

Godon, Martina;

Article – doi 10.5151/2594-5297-40357 p-428-440

Laminação de não-ferrosos

A BREEZE OF NOVELTY IN AL HOT ROLLING: THE DANIELI WAY

A BREEZE OF NOVELTY IN AL HOT ROLLING: THE DANIELI WAY

Gregoratti, Matteo; Vignolo, Luciano;

Article – doi 10.5151/2594-5297-39721 p-441-454

Laminação de placa fina

MECHANICAL PROPERTIES PREDICTION OF ADVANCED HIGH STRENGTH STEEL USING MACHINE LEARNING TECHNICAL

PREVISÃO DE PROPRIEDADES MECÂNICAS DE AÇOS AVANÇADOS DE ALTA RESISTÊNCIA USANDO TÉCNICAS DE MACHINE LEARNING

Zorzi, Julio Cezar de Sousa; Tavares, Tairine Berbert; Borba, Tadeu Messias Donizete; Oliveira, Fagner de Carvalho; Carvalho, Frederico Chaves;

Article – doi 10.5151/2594-5297-39403 p-455-467

Laminação de tiras a frio e processos de revestimento

Laminação de tiras a quente

Laminação steckel

IMPROVEMENT OF THE SAE 1080 CARBON STEEL HARDNESS RANGE FOR GRANITE SAW APPLICATION USING THE SIX SIGMA METHODOLOGY

IMPROVEMENT OF THE SAE 1080 CARBON STEEL HARDNESS RANGE FOR GRANITE SAW APPLICATION USING THE SIX SIGMA METHODOLOGY

Toledo Jr, Francisco Geraldo;

Article – doi 10.5151/2594-5297-40064 p-868-881